EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Antibacterial Structure Design of Porous Ti6Al4V by 3D Printing and Anodic Oxidation

Guijun Yang iD, Houjiang Liu, Ang Li iD, Tiansheng Liu, Qiqin Lu, Fang He

Materials · 25.07.2023 · 16 (15) · 5206

DOI: 10.3390/ma16155206 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.07.2023. Verfasst von Guijun Yang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Tianjin.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Titanium alloy Ti6Al4V is a commonly used bone implant material, primarily prepared as a porous material to better match the elastic modulus of human bone. However, titanium alloy is biologically inert and does not have antibacterial properties. At the same time, the porous structure with a large specific surface area also increases the risk of infection, leading to surgical failure. In this paper, we prepared three porous samples with different porosities of 60%, 75%, and 85%, respectively (for short, 3D-60, 3D-75, and 3D-85) using 3D printing technology and clarified the mechanical properties. Through tensile experiments, when the porosity was 60%, the compressive modulus was within the elastic modulus of human bone. Anodic oxidation technology carried out the surface modification of a 3D-printed porous titanium alloy with 60% porosity. Through change, the different voltages and times on the TiO2 oxide layer on the 3D-printed porous titanium alloy are different, and it reveals the growth mechanism of the TiO2 oxide layer on a 3D-printed unique titanium alloy. The surface hydrophilic and antibacterial properties of 3D-printed porous titanium alloy were significantly improved after modification by anodic oxidation.

Schlagwörter

Stichwörter der Autor:innen

3D printingTi6Al4V porous titanium alloyanodic oxidationantibacterial

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China.
  • College of Chemical Engineering, Qinghai University, Xining 810016, China.
  • Tianjin Hospital, Tianjin University, Tianjin 300211, China.

ORCID-Profile: Guijun Yang, Ang Li

Förderung

  • Natural Science Foundation of Tianjin

Zitieren

APA

Yang, G., Liu, H., Li, A., Liu, T., Lu, Q., & He, F. (2023). Antibacterial Structure Design of Porous Ti6Al4V by 3D Printing and Anodic Oxidation. Materials, 16(15), 5206. https://doi.org/10.3390/ma16155206

Vancouver

Yang G, Liu H, Li A, Liu T, Lu Q, He F. Antibacterial Structure Design of Porous Ti6Al4V by 3D Printing and Anodic Oxidation. Materials. 2023;16(15):5206. doi:10.3390/ma16155206

BibTeX
@article{Yang2023,
  author = {Yang, Guijun and Liu, Houjiang and Li, Ang and Liu, Tiansheng and Lu, Qiqin and He, Fang},
  title = {Antibacterial Structure Design of Porous Ti6Al4V by 3D Printing and Anodic Oxidation},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {15},
  pages = {5206},
  doi = {10.3390/ma16155206}
}
Kostenlos starten →