EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comparative Study of FSW, MIG, and TIG Welding of AA5083-H111 Based on the Evaluation of Welded Joints and Economic Aspect

Mohamed I A Habba iD, Naser A Alsaleh iD, Takwa E Badran, Mohamed M El-Sayed Seleman iD, Sabbah Ataya iD, Ahmed E El-Nikhaily, Akrum Abdul-Latif, Mohamed M Z Ahmed iD

Materials · 20.07.2023 · 16 (14) · 5124

DOI: 10.3390/ma16145124 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.07.2023. Verfasst von Mohamed I A Habba und 7 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Department, Faculty of Technology and Education, Suez University, Suez 43518, Egypt. Die Arbeit wurde bisher 49-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Funded by the Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University (IMSIU) through Research Partnership Program, Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University (IMSIU) through Research Partnership Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Selecting an economically suitable welding technique and optimizing welding parameters to obtain high joint quality is considered a challenge for expanding the 5xxx aluminum alloy series in various industrial applications. This work aims to investigate the effect of applying different welding techniques, tungsten inert gas (TIG) and metal inert gas (MIG), as fusion welding processes compared to friction stir welding (FSW), a solid-state joining process, on the joint performance of the produced 5 mm thick similar AA5083-H111 butt weldments at different welding conditions. Different methods were used to evaluate the quality of the produced joints, including visual inspection, radiographic testing (RT), and macrostructure evaluation, in addition to hardness and tensile tests. The fracture surface of the tensile-failed specimens was also investigated using a scanning electron microscope (SEM). Furthermore, the current study ended with an economic analysis of the welding techniques used. The results showed that, for the friction stir-welded joints, the radiographic films revealed defect-free joints at the two applied travel speeds of 100 mm/min and 400 mm/min and a constant tool rotating speed of 400 rpm. In addition, only one joint was welded by MIG at a welding current of 130 Amp, with a 19 L/min flow rate of pure argon. In contrast, the radiographic films showed internal defects such as lack of fusion (LOF), lack of penetration (LOP), and porosity (P) for the two joints welded by TIG and one joint welded by MIG. The hardness of the welded joints was enhanced over the AA5083-H111 base material (BM) by 24–29, 31–35, and 46–50% for the MIG, TIG, and FSW joints, respectively. The maximum ultimate tensile strength was obtained for the FSW joint welded at a 400 mm/min travel speed. Adopting FSW in shipbuilding applications can further produce the AA5083-H11 joints with higher quality and efficiency than fusion welding techniques such as MIG and TIG processes. In addition, time and cost comparisons between TIG, MIG, and FSW were performed for five-millimeter-thick and one-meter-long AA5083-H111.

Schlagwörter

Stichwörter der Autor:innen

AA5083-H11fracture surfacefriction stir weldingmechanical propertiesmetal inert gas (MIG)radiographic inspectiontungsten inert gas (TIG)welding time and cost

Autor:innen und Institutionen

  • Mechanical Department, Faculty of Technology and Education, Suez University, Suez 43518, Egypt.
  • Department of Mechanical Engineering, College of Engineering, Imam Mohammad Ibn Saud Islamic University, Riyadh 11432, Saudi Arabia.
  • Department of Metallurgical and Materials Engineering, Faculty of Petroleum and Mining Engineering, Suez University, Suez 43512, Egypt.
  • IUT de Tremblay-en-France, Université Paris 8, 93290 Tremblay-en-France, France.
  • Mechanical Engineering Department, College of Engineering at Al Kharj, Prince Sattam bin Abdulaziz University, Al Kharj 11942, Saudi Arabia.

ORCID-Profile: Mohamed I A Habba, Naser A Alsaleh, Mohamed M El-Sayed Seleman, Sabbah Ataya, Mohamed M Z Ahmed

Förderung

  • Funded by the Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University (IMSIU) through Research Partnership Program
  • Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University (IMSIU) through Research Partnership Program

Zitieren

APA

Habba, M. I. A., Alsaleh, N. A., Badran, T. E., El-Sayed Seleman, M. M., Ataya, S., El-Nikhaily, A. E., Abdul-Latif, A., & Ahmed, M. M. Z. (2023). Comparative Study of FSW, MIG, and TIG Welding of AA5083-H111 Based on the Evaluation of Welded Joints and Economic Aspect. Materials, 16(14), 5124. https://doi.org/10.3390/ma16145124

Vancouver

Habba MIA, Alsaleh NA, Badran TE, El-Sayed Seleman MM, Ataya S, El-Nikhaily AE, et al. Comparative Study of FSW, MIG, and TIG Welding of AA5083-H111 Based on the Evaluation of Welded Joints and Economic Aspect. Materials. 2023;16(14):5124. doi:10.3390/ma16145124

BibTeX
@article{Habba2023,
  author = {Habba, Mohamed I A and Alsaleh, Naser A and Badran, Takwa E and El-Sayed Seleman, Mohamed M and Ataya, Sabbah and El-Nikhaily, Ahmed E and Abdul-Latif, Akrum and Ahmed, Mohamed M Z},
  title = {Comparative Study of FSW, MIG, and TIG Welding of AA5083-H111 Based on the Evaluation of Welded Joints and Economic Aspect},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {14},
  pages = {5124},
  doi = {10.3390/ma16145124}
}
Kostenlos starten →