EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrasonic Velocity and Attenuation of Low-Carbon Steel at High Temperatures

Jan Lean Tai iD, Mohamed Thariq Hameed Sultan iD, Andrzej Łukaszewicz iD, Farah Syazwani Shahar, Wojciech Tarasiuk iD, Jerzy Napiórkowski iD

Materials · 20.07.2023 · 16 (14) · 5123

DOI: 10.3390/ma16145123 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.07.2023. Verfasst von Jan Lean Tai und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Geran Inisiatif Putra Siswazah (GP-IPS), Universiti Putra Malaysia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

On-stream inspections are the most appropriate method for routine inspections during plant operation without undergoing production downtime. Ultrasonic inspection, one of the on-stream inspection methods, faces challenges when performed at high temperatures exceeding the recommended 52 °C. This study aims to determine the ultrasonic velocity and attenuation with known material grade, thickness, and temperatures by comparing theoretical calculation and experimentation, with temperatures ranging between 30 °C to 250 °C on low-carbon steel, covering most petrochemical equipment material and working conditions. The aim of the theoretical analysis was to obtain Young’s modulus, Poisson’s ratio, and longitudinal velocity at different temperatures. The experiments validated the theoretical results of ultrasonic change due to temperature increase. It was found that the difference between the experiments and theoretical calculation is 3% at maximum. The experimental data of velocity and decibel change from the temperature range provide a reference for the future when dealing with unknown materials information on site that requires a quick corrosion status determination.

Schlagwörter

Stichwörter der Autor:innen

corrosionelevated temperaturelongitudinal wavenon-destructive evaluationultrasonic testing

Autor:innen und Institutionen

  • Department of Aerospace Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang 43400, Selangor, Malaysia.
  • Laboratory of Biocomposite Technology, Institute of Tropical Forest and Forest Product (INTROP), University Putra Malaysia, Serdang 43400, Selangor, Malaysia.
  • Aerospace Malaysia Innovation Centre [944751-A], Prime Minister's Department, MIGHT Partnership Hub, Jalan Impact, Cyberjaya 63600, Selangor, Malaysia.
  • Institute of Mechanical Engineering, Faculty of Mechanical Engineering, Bialystok University of Technology, 15-351 Bialystok, Poland.
  • Faculty of Technical Sciences, University of Warmia and Mazury in Olsztyn, 10-719 Olsztyn, Poland.

ORCID-Profile: Jan Lean Tai, Mohamed Thariq Hameed Sultan, Andrzej Łukaszewicz, Wojciech Tarasiuk, Jerzy Napiórkowski

Förderung

  • Geran Inisiatif Putra Siswazah (GP-IPS)
  • Universiti Putra Malaysia

Zitieren

APA

Tai, J. L., Sultan, M. T. H., Łukaszewicz, A., Shahar, F. S., Tarasiuk, W., & Napiórkowski, J. (2023). Ultrasonic Velocity and Attenuation of Low-Carbon Steel at High Temperatures. Materials, 16(14), 5123. https://doi.org/10.3390/ma16145123

Vancouver

Tai JL, Sultan MTH, Łukaszewicz A, Shahar FS, Tarasiuk W, Napiórkowski J. Ultrasonic Velocity and Attenuation of Low-Carbon Steel at High Temperatures. Materials. 2023;16(14):5123. doi:10.3390/ma16145123

BibTeX
@article{Tai2023,
  author = {Tai, Jan Lean and Sultan, Mohamed Thariq Hameed and Łukaszewicz, Andrzej and Shahar, Farah Syazwani and Tarasiuk, Wojciech and Napiórkowski, Jerzy},
  title = {Ultrasonic Velocity and Attenuation of Low-Carbon Steel at High Temperatures},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {14},
  pages = {5123},
  doi = {10.3390/ma16145123}
}
Kostenlos starten →