Material Data Identification in an Induction Hardening Test Rig with Physics-Informed Neural Networks
Materials · 15.07.2023 · 16 (14) · 5013
DOI: 10.3390/ma16145013 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.07.2023. Verfasst von Mohammad Zhian Asadzadeh und 2 weiteren Autor:innen. Beteiligte Einrichtung: Materials Center Leoben Forschung GmbH (MCL), Roseggerstraße 12, 8700 Leoben, Austria. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austrian Research Funding Association.
Abstract (Originalsprache)
Physics-Informed neural networks (PINNs) have demonstrated remarkable performance in solving partial differential equations (PDEs) by incorporating the governing PDEs into the network’s loss function during optimization. PINNs have been successfully applied to diverse inverse and forward problems. This study investigates the feasibility of using PINNs for material data identification in an induction hardening test rig. By utilizing temperature sensor data and imposing the heat equation with initial and boundary conditions, thermo-physical material properties, such as specific heat, thermal conductivity, and the heat convection coefficient, were estimated. To validate the effectiveness of the PINNs in material data estimation, benchmark data generated by a finite element model (FEM) of an air-cooled cylindrical sample were used. The accurate identification of the material data using only a limited number of virtual temperature sensor data points was demonstrated. The influence of the sensor positions and measurement noise on the uncertainty of the estimated parameters was examined. The study confirms the robustness and accuracy of this approach in the presence of measurement noise, albeit with lower efficiency, thereby requiring more time to converge. Lastly, the applicability of the presented approach to real measurement data obtained from an air-cooled cylindrical sample heated in an induction heating test rig was discussed. This research contributes to the accurate offline estimation of material data and has implications for optimizing induction heat treatments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Materials Center Leoben Forschung GmbH (MCL), Roseggerstraße 12, 8700 Leoben, Austria.
- Institute of Fundamentals and Theory of Electrical Engineering, Technical University of Graz, Inffeldgasse 18/I, 8010 Graz, Austria.
ORCID-Profile: Mohammad Zhian Asadzadeh, Peter Raninger
Förderung
- Austrian Research Funding Association
Zitieren
APA
Asadzadeh, M. Z., Roppert, K., & Raninger, P. (2023). Material Data Identification in an Induction Hardening Test Rig with Physics-Informed Neural Networks. Materials, 16(14), 5013. https://doi.org/10.3390/ma16145013
Vancouver
Asadzadeh MZ, Roppert K, Raninger P. Material Data Identification in an Induction Hardening Test Rig with Physics-Informed Neural Networks. Materials. 2023;16(14):5013. doi:10.3390/ma16145013
BibTeX
@article{Asadzadeh2023,
author = {Asadzadeh, Mohammad Zhian and Roppert, Klaus and Raninger, Peter},
title = {Material Data Identification in an Induction Hardening Test Rig with Physics-Informed Neural Networks},
journal = {Materials},
year = {2023},
volume = {16},
number = {14},
pages = {5013},
doi = {10.3390/ma16145013}
}
EUVIMED