EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Percolation in Carbon Nanotube-Reinforced Polymers for Strain-Sensing Applications: Computational Investigation on Carbon Nanotube Distribution, Curvature, and Aggregation

Alessandro Pontefisso iD, Michele Zappalorto

Materials · 12.07.2023 · 16 (14) · 4959

DOI: 10.3390/ma16144959 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.07.2023. Verfasst von Alessandro Pontefisso und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Management and Engineering, University of Padova, Stradella San Nicola 3, 36100 Vicenza, Italy. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present article investigates the possibility of simulating the electrical conductivity of carbon nanotube-reinforced polymer composites by numerical methods. Periodic representative volume elements are generated by randomly distributing perfectly conductive reinforcements in an insulating matrix and are used to assemble an electrical network representative of the nanocomposite, where the nanotube–nanotube contacts are considered equivalent resistors modeled by means of Simmons’ equation. A comparison of the results with experimental data from the literature supports the conclusion that a random distribution of reinforcements is not suitable for simulating this class of materials since percolation thresholds and conductivity trends are different, with experimental percolation taking place before the expectations. Including nanotube curvature does not solve the issue, since it hinders percolation even further. In agreement with experimental observations, the investigation suggests that a suitable approach requires the inclusion of aggregation during the volume element generation to reduce the volume fraction required to reach percolation. Some solutions available in the literature to generate properly representative volume elements are thus listed. Concerning strain sensing, the results suggest that representative volume elements generated with random distributions overestimate the strain sensitivity of the actual composites.

Schlagwörter

Stichwörter der Autor:innen

CNTcomputational analysispolymer compositesstructural health monitoring

Autor:innen und Institutionen

  • Department of Management and Engineering, University of Padova, Stradella San Nicola 3, 36100 Vicenza, Italy.

ORCID-Profile: Alessandro Pontefisso

Zitieren

APA

Pontefisso, A., & Zappalorto, M. (2023). Percolation in Carbon Nanotube-Reinforced Polymers for Strain-Sensing Applications: Computational Investigation on Carbon Nanotube Distribution, Curvature, and Aggregation. Materials, 16(14), 4959. https://doi.org/10.3390/ma16144959

Vancouver

Pontefisso A, Zappalorto M. Percolation in Carbon Nanotube-Reinforced Polymers for Strain-Sensing Applications: Computational Investigation on Carbon Nanotube Distribution, Curvature, and Aggregation. Materials. 2023;16(14):4959. doi:10.3390/ma16144959

BibTeX
@article{Pontefisso2023,
  author = {Pontefisso, Alessandro and Zappalorto, Michele},
  title = {Percolation in Carbon Nanotube-Reinforced Polymers for Strain-Sensing Applications: Computational Investigation on Carbon Nanotube Distribution, Curvature, and Aggregation},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {14},
  pages = {4959},
  doi = {10.3390/ma16144959}
}
Kostenlos starten →