EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Unveiling Sustainable Potential: A Life Cycle Assessment of Plant–Fiber Composite Microcellular Foam Molded Automotive Components

Tao Feng, Wei Guo, Wei Li, Zhenghua Meng, Yao Zhu, Feng Zhao iD, Weicheng Liang

Materials · 11.07.2023 · 16 (14) · 4952

DOI: 10.3390/ma16144952 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.07.2023. Verfasst von Tao Feng und 6 weiteren Autor:innen. Beteiligte Einrichtung: Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China Youth Fund, the 111Project, the Innovative Research Team Development Program of the Ministry of Education of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development and utilization of new plant–fiber composite materials and microcellular foam molding processes for the manufacturing of automotive components are effective approaches when achieving the lightweight, low-carbon, and sustainable development of automobiles. However, current research in this field has mainly focused on component performance development and functional exploration, with a limited assessment of environmental performance, which fails to meet the requirements of the current green and sustainable development agenda. In this study, based on a life cycle assessment, the resource, and environmental impacts of plant–fiber composite material automotive components and microcellular foam molding processes were investigated. Furthermore, a combined approach to digital twinning and life cycle evaluation was proposed to conduct resource and environmental assessments and analysis. The research results indicate that under current technological conditions, resource and environmental issues associated with plant–fiber composite material automotive components are significantly higher than those of traditional material components, mainly due to differences in their early-stage processes and the consumption of electrical energy and chemical raw materials. It is noteworthy that electricity consumption is the largest influencing factor that causes environmental issues throughout the life cycle, especially accounting for more than 42% of indicators such as ozone depletion, fossil resource consumption, and carbon dioxide emissions. Additionally, the microcellular foam molding process can effectively reduce the environmental impact of products by approximately 15% and exhibits better overall environmental performance compared to chemical foaming. In future development, optimizing the forming process of plant–fiber composite materials, increasing the proportion of clean energy use, and promoting the adoption of microcellular foam injection molding processes could be crucial for the green and sustainable development of automotive components.

Schlagwörter

Stichwörter der Autor:innen

carbon neutralitydigital twinlife cycle assessmentmicrocellular foam moldingplant–fiber composites

Autor:innen und Institutionen

  • Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan 430070, China.
  • Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan University of Technology, Wuhan 430070, China.
  • Hubei Research Center for New Energy & Intelligent Connected Vehicle, Wuhan University of Technology, Wuhan 430070, China.
  • Institute of Advanced Materials and Manufacturing Technology, Wuhan University of Technology, Wuhan 430070, China.
  • SAIC-GM-Wuling Automobile Co., Ltd., Liuzhou 545007, China.

ORCID-Profile: Feng Zhao

Förderung

  • the National Natural Science Foundation of China Youth Fund
  • the 111Project
  • the Innovative Research Team Development Program of the Ministry of Education of China
  • the Fundamental Research Funds for the Central Universities
  • National Key R&D Program of China
  • National Natural Science Foundation of China Youth Fund
  • 111Project
  • Innovative Research Team Development Program of the Ministry of Education of China

Zitieren

APA

Feng, T., Guo, W., Li, W., Meng, Z., Zhu, Y., Zhao, F., & Liang, W. (2023). Unveiling Sustainable Potential: A Life Cycle Assessment of Plant–Fiber Composite Microcellular Foam Molded Automotive Components. Materials, 16(14), 4952. https://doi.org/10.3390/ma16144952

Vancouver

Feng T, Guo W, Li W, Meng Z, Zhu Y, Zhao F, et al. Unveiling Sustainable Potential: A Life Cycle Assessment of Plant–Fiber Composite Microcellular Foam Molded Automotive Components. Materials. 2023;16(14):4952. doi:10.3390/ma16144952

BibTeX
@article{Feng2023,
  author = {Feng, Tao and Guo, Wei and Li, Wei and Meng, Zhenghua and Zhu, Yao and Zhao, Feng and Liang, Weicheng},
  title = {Unveiling Sustainable Potential: A Life Cycle Assessment of Plant–Fiber Composite Microcellular Foam Molded Automotive Components},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {14},
  pages = {4952},
  doi = {10.3390/ma16144952}
}
Kostenlos starten →