Selection of Parameters for Optimized WAAM Structures for Civil Engineering Applications
Materials · 06.07.2023 · 16 (13) · 4862
DOI: 10.3390/ma16134862 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 06.07.2023. Verfasst von Saham Sadat Sharifi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Science, Joining and Forming at Graz University of Technology, Kopernikusgasse 24/I, 8010 Graz, Austria. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Austrian Research Promotion Agency, Graz University of Technology.
Abstract (Originalsprache)
Using the CMT (Cold Metal Transfer, F. Fronius, Upper Austria) welding process, wire arc additive manufacturing (WAAM) enables companies to fabricate steel components in a resource-saving manner (additive vs. subtractive) by properly reinforcing existing steel components. Two fundamental questions are discussed in the current work. The first focus is on the general geometric possibilities offered by this process. The influence of various parameters, such as wire feed speed, travel speed, and torch inclination on the seam shape and build-up rate are presented. The microstructure of the manufactured components is evaluated through metallography and hardness testing. Based on the first results, print strategies are developed for different requirements. Moreover, suitable process parameter sets are recommended in terms of energy input per unit length, weld integrity and hardness distribution. The second focus is on testing and determining joint properties by analyzing the microhardness of the welded structures. The chosen parameter sets will be investigated, and steel quality equivalents according to ÖNORM EN ISO 18265 will be defined.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Materials Science, Joining and Forming at Graz University of Technology, Kopernikusgasse 24/I, 8010 Graz, Austria.
- Institute of Structural Design, Graz University of Technology, Technikerstrasse 4/IV, 8010 Graz, Austria.
ORCID-Profile: Saham Sadat Sharifi, Norbert Enzinger
Förderung
- Austrian Research Promotion Agency
- Graz University of Technology
Zitieren
APA
Sharifi, S. S., Fritsche, S., Holzinger, C., & Enzinger, N. (2023). Selection of Parameters for Optimized WAAM Structures for Civil Engineering Applications. Materials, 16(13), 4862. https://doi.org/10.3390/ma16134862
Vancouver
Sharifi SS, Fritsche S, Holzinger C, Enzinger N. Selection of Parameters for Optimized WAAM Structures for Civil Engineering Applications. Materials. 2023;16(13):4862. doi:10.3390/ma16134862
BibTeX
@article{Sharifi2023,
author = {Sharifi, Saham Sadat and Fritsche, Sebastian and Holzinger, Christoph and Enzinger, Norbert},
title = {Selection of Parameters for Optimized WAAM Structures for Civil Engineering Applications},
journal = {Materials},
year = {2023},
volume = {16},
number = {13},
pages = {4862},
doi = {10.3390/ma16134862}
}
EUVIMED