EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Sm + Er and Heat Treatment on As-Cast Microstructure and Mechanical Properties of 7055 Aluminum Alloy

Jue Wang, Faguo Li iD

Materials · 05.07.2023 · 16 (13) · 4846

DOI: 10.3390/ma16134846 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.07.2023. Verfasst von Jue Wang und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hunan Provincial Natural Science Foundation of China, Science and Technology Project of Education Department of Hunan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The 7055 aluminum alloy is an ultra-high strength aluminum alloy, which is widely used in the aerospace field and new energy automobile manufacturing industry. As it retains high strength, its plastic deformation ability needs to be improved, which limits its application in plastic processing. In this study, the cast grains of the 7055 aluminum alloy were refined by adding Sm + Er, and the proper heat treatment procedure was utilized to further precipitate the rare earth phase in order to increase the alloy’s strength and toughness. The grain size, microstructure and phase were characterized by optical microscopes (OMs), scanning electron microscopy—energy spectrum (SEM-EDS) and a XRD diffractometer (XRD). The macroscopic hardness, yield strength and tensile strength of alloy materials were measured by a hardness meter and universal electronic tensile machine. The results showed that the as-cast sample and the heat treatment sample all contained Al10Cu7Sm2 and Al8Cu4Er rare earth phases. But, after heat treatment, the volume percentage of the rare earth phase dramatically increased and the dispersion was more unified. When 0.3 wt.%Sm and 0.1 wt.%Er were added, the grain size could be refined to 53 μm. With the increase in the total content of rare earth elements, the refining effect first increased and then decreased. Under 410 °C solid solution for 2 h + 150 °C and aging for 12 h, the macroscopic hardness, yield strength, tensile strength and elongation of 0.3 wt.%Sm + 0.1 wt.%Er + 7055 as-cast samples were 155.8 HV, 620.5 MPa, 658.1 MPa and 11.90%, respectively. After the addition of Sm and Er elements and heat treatment, the grain refinement effect of 7055 aluminum alloy was obvious and the plastic property was greatly improved under the premise of maintaining its high-strength advantage.

Schlagwörter

Stichwörter der Autor:innen

7055 aluminum alloyErSmfine grain strengtheningheat treatment process

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China.

ORCID-Profile: Faguo Li

Förderung

  • Hunan Provincial Natural Science Foundation of China
  • Science and Technology Project of Education Department of Hunan Province

Zitieren

APA

Wang, J., & Li, F. (2023). Effect of Sm + Er and Heat Treatment on As-Cast Microstructure and Mechanical Properties of 7055 Aluminum Alloy. Materials, 16(13), 4846. https://doi.org/10.3390/ma16134846

Vancouver

Wang J, Li F. Effect of Sm + Er and Heat Treatment on As-Cast Microstructure and Mechanical Properties of 7055 Aluminum Alloy. Materials. 2023;16(13):4846. doi:10.3390/ma16134846

BibTeX
@article{Wang2023,
  author = {Wang, Jue and Li, Faguo},
  title = {Effect of Sm + Er and Heat Treatment on As-Cast Microstructure and Mechanical Properties of 7055 Aluminum Alloy},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {13},
  pages = {4846},
  doi = {10.3390/ma16134846}
}
Kostenlos starten →