EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Bi–Sn–Pb Alloy and Ball-Milling Duration on the Reactivity of Magnesium–Aluminum Waste-Based Materials for Hydrogen Production

Olesya A Buryakovskaya iD, Grayr N Ambaryan iD, Alexey B Tarasenko, Musi Zh Suleimanov, Mikhail S Vlaskin iD

Materials · 30.06.2023 · 16 (13) · 4745

DOI: 10.3390/ma16134745 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.06.2023. Verfasst von Olesya A Buryakovskaya und 4 weiteren Autor:innen. Beteiligte Einrichtung: Joint Institute for High Temperatures of the Russian Academy of Sciences, 125412 Moscow, Russia. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 166 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation, the Ministry of Science and Higher Education of the Russian Federation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present study, composite materials were elaborated of mixed scrap of Mg-based casting alloys and low melting point Bi–Sn–Pb alloy by high energy ball milling, and their reactivity in NaCl solution with hydrogen release was tested. The impacts of the additive content and ball milling duration on their microstructure and hydrogen generation performance were investigated. Scanning electron microscopy (SEM) analysis revealed significant microstructural transformations of the particles during milling, and X-ray diffraction analysis (XRD) proved the formation of new intermetallic phases Mg3Bi2, Mg2Sn, and Mg2Pb. The said intermetallic phases were anticipated to act as ‘microcathodes’ enhancing galvanic corrosion of the base metal. The dependency of the samples’ reactivity on the additive content and milling duration was determined to be nonmonotonic. For the samples with 0, 2.5, and 5 wt.% Rose alloy, ball-milling during 1 h provided the highest hydrogen generation rates and yields (as compared to 0.5 and 2 h), while in the case of the maximum 10 wt.%, the optimal time shifted to 0.5 h. The sample activated with 10 wt.% Rose alloy for 0.5 h provided the highest ‘metal-to-hydrogen’ yield and rapid reaction, thus overperforming those with lower additive contents and that without additives.

Schlagwörter

Stichwörter der Autor:innen

aqueous salt solutionsball millinghydrogen generationhydroreactive materialsintermetallideslow melting point alloymagnesium scrapmicrostructural transformation

Autor:innen und Institutionen

  • Joint Institute for High Temperatures of the Russian Academy of Sciences, 125412 Moscow, Russia.

ORCID-Profile: Olesya A Buryakovskaya, Grayr N Ambaryan, Mikhail S Vlaskin

Förderung

  • Ministry of Science and Higher Education of the Russian Federation
  • the Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Buryakovskaya, O. A., Ambaryan, G. N., Tarasenko, A. B., Suleimanov, M. Z., & Vlaskin, M. S. (2023). Effects of Bi–Sn–Pb Alloy and Ball-Milling Duration on the Reactivity of Magnesium–Aluminum Waste-Based Materials for Hydrogen Production. Materials, 16(13), 4745. https://doi.org/10.3390/ma16134745

Vancouver

Buryakovskaya OA, Ambaryan GN, Tarasenko AB, Suleimanov MZ, Vlaskin MS. Effects of Bi–Sn–Pb Alloy and Ball-Milling Duration on the Reactivity of Magnesium–Aluminum Waste-Based Materials for Hydrogen Production. Materials. 2023;16(13):4745. doi:10.3390/ma16134745

BibTeX
@article{Buryakovskaya2023,
  author = {Buryakovskaya, Olesya A and Ambaryan, Grayr N and Tarasenko, Alexey B and Suleimanov, Musi Zh and Vlaskin, Mikhail S},
  title = {Effects of Bi–Sn–Pb Alloy and Ball-Milling Duration on the Reactivity of Magnesium–Aluminum Waste-Based Materials for Hydrogen Production},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {13},
  pages = {4745},
  doi = {10.3390/ma16134745}
}
Kostenlos starten →