EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural Characterization and Prior Particle Boundary (PPB) of PM Nickel-Based Superalloys by Spark Plasma Sintering (SPS)

Zijun Qin, Qianyi Li, Guowei Wang, Feng Liu iD

Materials · 28.06.2023 · 16 (13) · 4664

DOI: 10.3390/ma16134664 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.06.2023. Verfasst von Zijun Qin und 3 weiteren Autor:innen. Beteiligte Einrichtung: The State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Major Project, National Natural Science Foundation of China, Natural Science Foundation of Hunan Province of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research investigates the microstructure and defects of powder metallurgy (PM) nickel-based superalloys prepared by spark plasma sintering (SPS). The densification, microstructural evolution, and precipitate phase evolution processes of FGH96 superalloy after powder heat treatment (PHT) and sintering via SPS are specifically analyzed. Experimental results demonstrate that SPS technology, when applied to sinter at the sub-solidus temperature of the γ’ phase, effectively mitigates the formation of a prior particle boundary (PPB). Based on experimental and computational findings, it has been determined that the presence of elemental segregation and Al2O3 oxides on the surface of pre-alloyed powders leads to the preferential precipitation of MC-type carbides and Al2O3 and ZrO2 oxides in the sintering necks during the hot consolidation process, resulting in the formation of PPB. This study contributes to the understanding of microstructural modifications achieved through SPS technology, providing crucial information for optimizing sintering conditions and reducing the widespread occurrence of PPB, ultimately enhancing the material performance of PM nickel-based superalloys.

Schlagwörter

Stichwörter der Autor:innen

powder metallurgyprior particle boundary (PPB)spark plasma sintering (SPS)superalloy

Autor:innen und Institutionen

  • The State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China.

ORCID-Profile: Feng Liu

Förderung

  • National Science and Technology Major Project
  • National Natural Science Foundation of China
  • Natural Science Foundation of Hunan Province of China
  • Science and Technology Innovation Program of Hunan Province

Zitieren

APA

Qin, Z., Li, Q., Wang, G., & Liu, F. (2023). Microstructural Characterization and Prior Particle Boundary (PPB) of PM Nickel-Based Superalloys by Spark Plasma Sintering (SPS). Materials, 16(13), 4664. https://doi.org/10.3390/ma16134664

Vancouver

Qin Z, Li Q, Wang G, Liu F. Microstructural Characterization and Prior Particle Boundary (PPB) of PM Nickel-Based Superalloys by Spark Plasma Sintering (SPS). Materials. 2023;16(13):4664. doi:10.3390/ma16134664

BibTeX
@article{Qin2023,
  author = {Qin, Zijun and Li, Qianyi and Wang, Guowei and Liu, Feng},
  title = {Microstructural Characterization and Prior Particle Boundary (PPB) of PM Nickel-Based Superalloys by Spark Plasma Sintering (SPS)},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {13},
  pages = {4664},
  doi = {10.3390/ma16134664}
}
Kostenlos starten →