Eco-Friendly Recycling of Lithium Batteries for Extraction of High-Purity Metals
Materials · 28.06.2023 · 16 (13) · 4662
DOI: 10.3390/ma16134662 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.06.2023. Verfasst von Gamal M A Mahran und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mining Engineering Department, King Abdulaziz University, Jeddah 21589, Saudi Arabia. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Technical and financial support provided by the Ministry of Education and King Abdulaziz University, Ministry of Education.
Abstract (Originalsprache)
The significant increase in lithium batteries consumption produces a significant quantity of discarded lithium-ion batteries (LIBs). On the one hand, the shortage of high-grade ores leads to the necessity of processing low-grade ores, which contain a low percentage of valuable metals in comparison to the discarded LIBs that contain a high percentage of these metals, which enhances the processing of the discarded LIBs. On the other hand, the processing of discarded LIBs reduces the negative environmental effects that result from their storage and the harmful elements contained in their composition. Hence, the current study aims at developing cost-effective and ecofriendly technology for cobalt and lithium metal ion recovery based on discarded LIBs. A novel synthesized solid-phase adsorbent (TZAB) was utilized for the selective removal of cobalt from synthetic solutions and spent LIBs. The synthesized TZAB adsorbent was characterized by using 13C-NMR, GC-MS, FT-IR, 1H-NMR, and TGA. The factors affecting the adsorption of cobalt and lithium ions from synthetic solutions and spent LIBs, including the sorbent dose, pH, contact time, temperature, and cobalt concentration were investigated. The conditions surrounding the recovery of cobalt and lithium from processing discarded LIBs, were investigated to optimize the maximum recovery. The Langmuir, Freundlich, and Dubinin–Radushkevich (D-R) isotherm models were used to study the kinetics of the adsorption process. The obtained results showed that high-purity CoC2O4 and Li3PO4 were obtained with a purity of 95% and 98.3% and a percent recovery of 93.48% and 95.76%, respectively. The maximum recovery of Co(II) from synthetic solutions was obtained at C0 = 500 mg·L−1, dose of 0.08 g, pH 7.5, T = 25 °C, and reaction time = 90 min. The collected data from Langmuir’s isotherm and the adsorption processes of Co agree with the data predicted by the D-R isotherm models, which shows that the adsorption of Co(II) onto the TZAB seems to be chemisorption, and the results agree with the Langmuir and D-R isotherm models.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mining Engineering Department, King Abdulaziz University, Jeddah 21589, Saudi Arabia.
- Nuclear Materials Authority, Maadi, Cairo 530, Egypt.
- Mining and Petroleum Department, Faculty of Engineering, Al-Azhar University, Cairo 11884, Egypt.
ORCID-Profile: Mohamed A Gado, Amr B ElDeeb
Förderung
- Technical and financial support provided by the Ministry of Education and King Abdulaziz University
- Ministry of Education
Zitieren
APA
Mahran, G. M. A., Gado, M. A., Fathy, W. M., & ElDeeb, A. B. (2023). Eco-Friendly Recycling of Lithium Batteries for Extraction of High-Purity Metals. Materials, 16(13), 4662. https://doi.org/10.3390/ma16134662
Vancouver
Mahran GMA, Gado MA, Fathy WM, ElDeeb AB. Eco-Friendly Recycling of Lithium Batteries for Extraction of High-Purity Metals. Materials. 2023;16(13):4662. doi:10.3390/ma16134662
BibTeX
@article{Mahran2023,
author = {Mahran, Gamal M A and Gado, Mohamed A and Fathy, Wael M and ElDeeb, Amr B},
title = {Eco-Friendly Recycling of Lithium Batteries for Extraction of High-Purity Metals},
journal = {Materials},
year = {2023},
volume = {16},
number = {13},
pages = {4662},
doi = {10.3390/ma16134662}
}
EUVIMED