EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Plastic Deformation on the Structure and Mechanical Properties of the Zn-4Ag-1Cu Zinc Alloy

Elvira Khafizova iD, Elvira Fakhretdinova iD, Rinat Islamgaliev, Milena Polenok, Vil Sitdikov, Hakan Yilmazer

Materials · 27.06.2023 · 16 (13) · 4646

DOI: 10.3390/ma16134646 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.06.2023. Verfasst von Elvira Khafizova und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Physics of Advanced Materials, Ufa University of Science and Technology, 450076 Ufa, Russia. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation and Russian Foundation for Basic Research, Ministry of Science and Higher Education of the Russian Federation, RFBR and TUBITAK.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is known that zinc biodegradable alloys are a promising material for producing biomedical implants for orthopedics and vascular stents. Among them, the Zn-Ag-Cu zinc alloy is of special interest due to the antibacterial and antimicrobial properties of Ag and Cu. To improve the mechanical properties of the Zn-4Ag-1Cu zinc alloy, the effect of equal-channel angular pressing (ECAP) on the microstructure and strength has been investigated. The ECAP conditions for the Zn-4Ag-1Cu alloy were chosen by modeling in the Deform 3 D program (temperature and strain rate). The microstructure was analyzed using transmission electron microscopy, scanning electron microscopy and X-ray diffraction analysis. The study of strength was carried out by measuring the microhardness and tensile tests of small samples with a gauge dimension of 0.8 × 1 × 4 mm3. The microstructure after ECAP was characterized by equiaxed grains ranging in a size from 1.5 µm to 4 µm with particles in a size from 200 nm to 1 µm uniformly distributed along the boundaries. The ECAP samples showed a high strength of 348 MPa and good ductility of up to 30%, demonstrating their great potential as promising materials for producing medical stents.

Schlagwörter

Stichwörter der Autor:innen

Zn-based alloysbiodegradable metalscomputer simulationequal-channel angular pressingmechanical propertiesmicrostructures

Autor:innen und Institutionen

  • Institute of Physics of Advanced Materials, Ufa University of Science and Technology, 450076 Ufa, Russia.
  • Institute of Molecules and Crystal Physics, Ufa Federal Research Center of the Russian Academy of Sciences, 450075 Ufa, Russia.
  • LLC "RN-BashNIPIneft", Lenina Street 86/1, 450076 Ufa, Russia.
  • Department of Metallurgical and Materials Engineering, Yildiz Technical University, Esenler 34220, Istanbul, Turkey.
  • Health Biotechnology Joint Research and Application Center of Excellence, Esenler 34220, Istanbul, Turkey.

ORCID-Profile: Elvira Khafizova, Elvira Fakhretdinova

Förderung

  • Ministry of Science and Higher Education of the Russian Federation and Russian Foundation for Basic Research
  • Ministry of Science and Higher Education of the Russian Federation
  • RFBR and TUBITAK

Zitieren

APA

Khafizova, E., Fakhretdinova, E., Islamgaliev, R., Polenok, M., Sitdikov, V., & Yilmazer, H. (2023). Effect of Plastic Deformation on the Structure and Mechanical Properties of the Zn-4Ag-1Cu Zinc Alloy. Materials, 16(13), 4646. https://doi.org/10.3390/ma16134646

Vancouver

Khafizova E, Fakhretdinova E, Islamgaliev R, Polenok M, Sitdikov V, Yilmazer H. Effect of Plastic Deformation on the Structure and Mechanical Properties of the Zn-4Ag-1Cu Zinc Alloy. Materials. 2023;16(13):4646. doi:10.3390/ma16134646

BibTeX
@article{Khafizova2023,
  author = {Khafizova, Elvira and Fakhretdinova, Elvira and Islamgaliev, Rinat and Polenok, Milena and Sitdikov, Vil and Yilmazer, Hakan},
  title = {Effect of Plastic Deformation on the Structure and Mechanical Properties of the Zn-4Ag-1Cu Zinc Alloy},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {13},
  pages = {4646},
  doi = {10.3390/ma16134646}
}
Kostenlos starten →