EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Deposition Time on Titanium Nitride (TiN) Thin Film Coating Synthesis Using Chemical Vapour Deposition

Ranjan Kumar Ghadai, Kamaraj Logesh iD, Robert Čep iD, Jasgurpreet Singh Chohan iD, Kanak Kalita iD

Materials · 26.06.2023 · 16 (13) · 4611

DOI: 10.3390/ma16134611 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.06.2023. Verfasst von Ranjan Kumar Ghadai und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Sikkim Manipal Institute of Technology, Sikkim Manipal University, Majhitar 737 136, India. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Titanium nitride (TiN) thin film coatings were grown over silicon (p-type) substrate using the atmospheric pressure chemical vapour deposition (APCVD) technique. The synthesis process was carried out to evaluate the effect of deposition time on the physical and mechanical characteristics of TiN coating. Thin films grown over Si substrate were further characterised to evaluate the morphological properties, surface roughness and mechanical properties using a scanning electrode microscope (SEM), atomic force microscopy (AFM) and nanoindentation, respectively. EDS equipped with SEM showed the presence of Ti and N elements in considerable amounts. TiN morphology obtained from the SEM test showed small-sized particles on the surface along with cracks and pores. AFM results revealed that by increasing the deposition time, the surface roughness of the coating also increased. The nanomechanical properties such as nanohardness (H) and Young’s modulus (E), etc., evaluated using the nanoindentation technique showed that higher deposition time led to an increase in H and E. Overall, it was observed that deposition time plays a vital role in the TiN coating deposition using the CVD technique.

Schlagwörter

Stichwörter der Autor:innen

CVDSEMTiNnanoindentation

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Sikkim Manipal Institute of Technology, Sikkim Manipal University, Majhitar 737 136, India.
  • Department of Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Avadi 600 062, India.
  • Department of Machining, Assembly and Engineering Metrology, Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, 708 00 Ostrava, Czech Republic.
  • Department of Mechanical Engineering and University Centre for Research & Development, Chandigarh University, Mohali 140 413, India.

ORCID-Profile: Kamaraj Logesh, Robert Čep, Jasgurpreet Singh Chohan, Kanak Kalita

Zitieren

APA

Ghadai, R. K., Logesh, K., Čep, R., Chohan, J. S., & Kalita, K. (2023). Influence of Deposition Time on Titanium Nitride (TiN) Thin Film Coating Synthesis Using Chemical Vapour Deposition. Materials, 16(13), 4611. https://doi.org/10.3390/ma16134611

Vancouver

Ghadai RK, Logesh K, Čep R, Chohan JS, Kalita K. Influence of Deposition Time on Titanium Nitride (TiN) Thin Film Coating Synthesis Using Chemical Vapour Deposition. Materials. 2023;16(13):4611. doi:10.3390/ma16134611

BibTeX
@article{Ghadai2023,
  author = {Ghadai, Ranjan Kumar and Logesh, Kamaraj and Čep, Robert and Chohan, Jasgurpreet Singh and Kalita, Kanak},
  title = {Influence of Deposition Time on Titanium Nitride (TiN) Thin Film Coating Synthesis Using Chemical Vapour Deposition},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {13},
  pages = {4611},
  doi = {10.3390/ma16134611}
}
Kostenlos starten →