EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation of Wire Arc Additive Manufacturing in the Reinforcement of a Half-Cylinder Shell Geometry

Xiao Fan Zhao iD, Avelino Zapata iD, Christian Bernauer iD, Siegfried Baehr iD, Michael F Zaeh

Materials · 24.06.2023 · 16 (13) · 4568

DOI: 10.3390/ma16134568 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.06.2023. Verfasst von Xiao Fan Zhao und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Machine Tools and Industrial Management (iwb), TUM School of Engineering and Design, Technical University of Munich, Boltzmannstr. 15, …. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bavarian Ministry of Economic Affairs, Regional Development and Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wire arc additive manufacturing (WAAM) is an additive manufacturing process based on gas metal arc welding. It allows the fabrication of large-volume metal components by the controlled deposition and stacking of weld beads. Next to the near-net-shape manufacturing of metal components, WAAM is also applied in the local reinforcement of structural parts, such as shell geometries. However, this procedure can lead to undesired thermally induced distortions. In this work, the distortion caused by the WAAM reinforcement of half-cylinder shell geometries was investigated through experiments and transient thermo-mechanical finite element simulations. In the experiments, the weld beads were applied to the specimen, while its thermal history was measured using thermocouples. The developing distortions were registered using displacement transducers. The experimental data were used to calibrate and validate the simulation. Using the validated model, the temperature field and the distortions of the specimens could be predicted. Subsequently, the simulation was used to assess different deposition patterns and shell thicknesses with regard to the resulting part distortions. The investigations revealed a non-linear relation between shell thickness and distortion. Moreover, the orientation and the sequence of the weld beads had a significant impact on the formation of distortion. However, those effects diminished with an increasing shell thickness.

Schlagwörter

Stichwörter der Autor:innen

deposition sequencedirected energy depositionfinite element analysissimulationwire arc additive manufacturing

Autor:innen und Institutionen

  • Institute for Machine Tools and Industrial Management (iwb), TUM School of Engineering and Design, Technical University of Munich, Boltzmannstr. 15, 85748 Garching, Germany.

ORCID-Profile: Xiao Fan Zhao, Avelino Zapata, Christian Bernauer, Siegfried Baehr

Förderung

  • Bavarian Ministry of Economic Affairs, Regional Development and Energy

Zitieren

APA

Zhao, X. F., Zapata, A., Bernauer, C., Baehr, S., & Zaeh, M. F. (2023). Simulation of Wire Arc Additive Manufacturing in the Reinforcement of a Half-Cylinder Shell Geometry. Materials, 16(13), 4568. https://doi.org/10.3390/ma16134568

Vancouver

Zhao XF, Zapata A, Bernauer C, Baehr S, Zaeh MF. Simulation of Wire Arc Additive Manufacturing in the Reinforcement of a Half-Cylinder Shell Geometry. Materials. 2023;16(13):4568. doi:10.3390/ma16134568

BibTeX
@article{Zhao2023,
  author = {Zhao, Xiao Fan and Zapata, Avelino and Bernauer, Christian and Baehr, Siegfried and Zaeh, Michael F},
  title = {Simulation of Wire Arc Additive Manufacturing in the Reinforcement of a Half-Cylinder Shell Geometry},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {13},
  pages = {4568},
  doi = {10.3390/ma16134568}
}
Kostenlos starten →