Hybrid Additive and Subtractive Manufacturing Method Using Pulsed Arc Plasma
Materials · 24.06.2023 · 16 (13) · 4561
DOI: 10.3390/ma16134561 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 24.06.2023. Verfasst von Xiaoming Duan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering and Automation, Harbin Institute of Technology, Harbin 150001, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Heilongjiang Province of China, state Key Laboratory of Solidification Processing in NPU.
Abstract (Originalsprache)
In this study, a novel hybrid additive and subtractive manufacturing method using pulsed arc plasma (PAP-HASM) was developed to better integrate additive and subtractive processes. The PAP-HASM process is based on the flexible application of pulsed arc plasma. In this PAP-HASM method, wire arc additive manufacturing using pulsed arc plasma (PAP-WAAM) and dry electrical discharge machining (EDM) milling were used as additive and subtractive techniques, respectively; both are thermal machining processes based on pulsed arc plasma, and both are dry machining techniques requiring no working fluids. The PAP-HASM can be easily realized by only changing the pulsed power supply and tool electrodes. A key technological challenge is that the recast layer on the part surface after dry EDM milling may have a detrimental effect on the component fabricated by PAP-HASM. Here, the hybrid manufacturing method developed in this study was validated with commonly used 316L stainless steel. Preliminary experimental results showed that the PAP-HASM specimens exhibited excellent tensile properties, with an ultimate tensile strength of 539 ± 8 MPa and elongation of 46 ± 4%, which were comparable to the PAP-WAAM specimens. The recast layer on the surface after dry EDM milling has no significant detrimental effect on the mechanical properties of the parts fabricated by PAP-HASM. In addition, compared with components fabricated by PAP-WAAM, those fabricated by PAP-HASM showed significantly better surface roughness.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering and Automation, Harbin Institute of Technology, Harbin 150001, China.
- Department of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an 710072, China.
ORCID-Profile: Haiou Yang
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Heilongjiang Province of China
- state Key Laboratory of Solidification Processing in NPU
Zitieren
APA
Duan, X., Cui, R., Yang, H., & Yang, X. (2023). Hybrid Additive and Subtractive Manufacturing Method Using Pulsed Arc Plasma. Materials, 16(13), 4561. https://doi.org/10.3390/ma16134561
Vancouver
Duan X, Cui R, Yang H, Yang X. Hybrid Additive and Subtractive Manufacturing Method Using Pulsed Arc Plasma. Materials. 2023;16(13):4561. doi:10.3390/ma16134561
BibTeX
@article{Duan2023,
author = {Duan, Xiaoming and Cui, Ruirui and Yang, Haiou and Yang, Xiaodong},
title = {Hybrid Additive and Subtractive Manufacturing Method Using Pulsed Arc Plasma},
journal = {Materials},
year = {2023},
volume = {16},
number = {13},
pages = {4561},
doi = {10.3390/ma16134561}
}
EUVIMED