Comparative Study of Corrosion Behaviors of WC-NiMo and WC-Co Cemented Carbides
Materials · 20.06.2023 · 16 (12) · 4480
DOI: 10.3390/ma16124480 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 20.06.2023. Verfasst von Nádia Alves Nery Balbino und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Natural Resources, Federal University of Itajubá, Itajubá 37500-903, Brazil. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: CAPES, CNPq, FAPEMIG.
Abstract (Originalsprache)
In this paper, the influence of a nickel binder metal and molybdenum carbide as an additional alloying element on the microstructure and corrosion behavior of WC-based cemented carbides, processed by conventional powder metallurgy, was studied, and a comparison with conventional cemented carbide (WC-Co) was carried out. The sintered alloys were characterized, before and after corrosive tests, by analyses using optical microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. The corrosion resistance of the cemented carbides was investigated by open circuit potential, potentiodynamic polarization, and electrochemical impedance spectroscopy in a 3.5 wt.% NaCl solution. The WC-NiMo cemented carbides showed microstructures similar to those of WC-Co; however, pores and binder islands were observed in the microstructures. The corrosion tests showed promising results, the WC-NiMo cemented carbide showed superior corrosion resistance and higher passivation capacity than the WC-Co cemented carbide. The WC-NiMo alloy showed a higher EOC ≈−0.18 V vs. Ag|AgCl|KCl3mol/L than the WC-Co (EOC≈−0.45 V vs. Ag|AgCl|KCl3mol/L). The potentiodynamic polarization curves showed lower current density values throughout the potential range for the WC-NiMo alloy, and it was observed that Ecorr was less negative (≈−0.416 V vs. Ag|AgCl|KCl3mol/L) than for WC-Co (≈−0.543 V vs. V vs. Ag|AgCl|KCl3mol/L). The EIS analysis confirmed low rate corrosion of WC-NiMo associated with the formation of a passive thin layer. This alloy showed a higher Rct (1970.70 Ω).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Natural Resources, Federal University of Itajubá, Itajubá 37500-903, Brazil.
- Institute of Mechanical Engineering, Federal University of Itajubá, Itajubá 37500-903, Brazil.
- Institute of Physics and Chemistry, Federal University of Itajubá, Itajubá 37500-903, Brazil.
ORCID-Profile: Nádia Alves Nery Balbino, Edmilson Otoni Corrêa
Förderung
- CAPES
- CNPq
- FAPEMIG
Zitieren
APA
Balbino, N. A. N., Corrêa, E. O., Huanca, D. R., de Freitas Matos, F. A., & de Carvalho Valeriano, L. (2023). Comparative Study of Corrosion Behaviors of WC-NiMo and WC-Co Cemented Carbides. Materials, 16(12), 4480. https://doi.org/10.3390/ma16124480
Vancouver
Balbino NAN, Corrêa EO, Huanca DR, de Freitas Matos FA, de Carvalho Valeriano L. Comparative Study of Corrosion Behaviors of WC-NiMo and WC-Co Cemented Carbides. Materials. 2023;16(12):4480. doi:10.3390/ma16124480
BibTeX
@article{Balbino2023,
author = {Balbino, Nádia Alves Nery and Corrêa, Edmilson Otoni and Huanca, Danilo Roque and de Freitas Matos, Flávio Amaury and de Carvalho Valeriano, Livio},
title = {Comparative Study of Corrosion Behaviors of WC-NiMo and WC-Co Cemented Carbides},
journal = {Materials},
year = {2023},
volume = {16},
number = {12},
pages = {4480},
doi = {10.3390/ma16124480}
}
EUVIMED