EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Freeze-Drying Process for the Fabrication of Collagen-Based Sponges as Medical Devices in Biomedical Engineering

Chrysoula Katrilaka iD, Niki Karipidou iD, Nestor Petrou iD, Chris Manglaris iD, George Katrilakas iD, Anastasios Nektarios Tzavellas, Maria Pitou, Eleftherios E Tsiridis, Theodora Choli-Papadopoulou, Amalia Aggeli

Materials · 16.06.2023 · 16 (12) · 4425

DOI: 10.3390/ma16124425 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 16.06.2023. Verfasst von Chrysoula Katrilaka und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, School of Engineering, Aristotle University of Thessaloniki, University Campus, 54124 Thessaloniki, Greece. Die Arbeit wurde bisher 76-mal zitiert (Crossref) und nennt 199 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, European Regional Development Fund of the European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a systematic review of a key sector of the much promising and rapidly evolving field of biomedical engineering, specifically on the fabrication of three-dimensional open, porous collagen-based medical devices, using the prominent freeze-drying process. Collagen and its derivatives are the most popular biopolymers in this field, as they constitute the main components of the extracellular matrix, and therefore exhibit desirable properties, such as biocompatibility and biodegradability, for in vivo applications. For this reason, freeze-dried collagen-based sponges with a wide variety of attributes can be produced and have already led to a wide range of successful commercial medical devices, chiefly for dental, orthopedic, hemostatic, and neuronal applications. However, collagen sponges display some vulnerabilities in other key properties, such as low mechanical strength and poor control of their internal architecture, and therefore many studies focus on the settlement of these defects, either by tampering with the steps of the freeze-drying process or by combining collagen with other additives. Furthermore, freeze drying is still considered a high-cost and time-consuming process that is often used in a non-optimized manner. By applying an interdisciplinary approach and combining advances in other technological fields, such as in statistical analysis, implementing the Design of Experiments, and Artificial Intelligence, the opportunity arises to further evolve this process in a sustainable and strategic manner, and optimize the resulting products as well as create new opportunities in this field.

Schlagwörter

Stichwörter der Autor:innen

Artificial Intelligencealignmentbiomaterialsbiomedical engineeringcollagenfreeze dryinggelatinmedical devicesmodeling

Autor:innen und Institutionen

  • Department of Chemical Engineering, School of Engineering, Aristotle University of Thessaloniki, University Campus, 54124 Thessaloniki, Greece.
  • 3rd Department of Orthopedics, School of Medicine, Aristotle University of Thessaloniki, University Campus, 54124 Thessaloniki, Greece.
  • School of Chemistry, Aristotle University of Thessaloniki, University Campus, 54124 Thessaloniki, Greece.

ORCID-Profile: Chrysoula Katrilaka, Niki Karipidou, Nestor Petrou, Chris Manglaris, George Katrilakas

Förderung

  • European Union
  • European Regional Development Fund of the European Union

Zitieren

APA

Katrilaka, C., Karipidou, N., Petrou, N., Manglaris, C., Katrilakas, G., Tzavellas, A. N., Pitou, M., Tsiridis, E. E., Choli-Papadopoulou, T., & Aggeli, A. (2023). Freeze-Drying Process for the Fabrication of Collagen-Based Sponges as Medical Devices in Biomedical Engineering. Materials, 16(12), 4425. https://doi.org/10.3390/ma16124425

Vancouver

Katrilaka C, Karipidou N, Petrou N, Manglaris C, Katrilakas G, Tzavellas AN, et al. Freeze-Drying Process for the Fabrication of Collagen-Based Sponges as Medical Devices in Biomedical Engineering. Materials. 2023;16(12):4425. doi:10.3390/ma16124425

BibTeX
@article{Katrilaka2023,
  author = {Katrilaka, Chrysoula and Karipidou, Niki and Petrou, Nestor and Manglaris, Chris and Katrilakas, George and Tzavellas, Anastasios Nektarios and Pitou, Maria and Tsiridis, Eleftherios E and Choli-Papadopoulou, Theodora and Aggeli, Amalia},
  title = {Freeze-Drying Process for the Fabrication of Collagen-Based Sponges as Medical Devices in Biomedical Engineering},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {12},
  pages = {4425},
  doi = {10.3390/ma16124425}
}
Kostenlos starten →