Incorporating Industrial By-Products into Geopolymer Mortar: Effects on Strength and Durability
Materials · 15.06.2023 · 16 (12) · 4406
DOI: 10.3390/ma16124406 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.06.2023. Verfasst von Tang Van Lam und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Civil Engineering, Hanoi University of Mining and Geology, 18 Pho Vien, Duc Thang, Hanoi 100000, Vietnam. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education and Training of Vietnam (MOET).
Abstract (Originalsprache)
In recent years, the reuse of industrial waste has become increasingly important for sustainable development. Therefore, this study investigated the application of granulated blast furnace slag (GBFS) as a cementitious replacement material in fly-ash-based geopolymer mortar containing silica fume (GMS). The performance changes in the GMS samples manufactured with different GBFS ratios (0–50 wt%) and alkaline activators were evaluated. The results indicated that GBFS replacement from 0 wt% to 50 wt% significantly affects GMS performance, including improving the bulk density from 2235 kg/m3 to 2324 kg/m3, flexural-compressive strength from 5.83 MPa to 7.29 MPa and 63.5 MPa to 80.2 MPa, respectively; a decrease in water absorption and chloride penetration, and an improvement in the corrosion resistance of GMS samples. The GMS mixture containing 50 wt% GBFS demonstrated the best performances with notable results regarding strength and durability. Owing to the increased production of C-S-H gel, the microstructure of the GMS sample containing more GBFS was denser, as obtained via the scanning electron micrograph analysis results. Incorporating the three industrial by-products into geopolymer mortars was verified when all samples were determined to be in accordance with the relevant Vietnamese standards. The results demonstrate a promising method to manufacture geopolymer mortars that aid sustainable development.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Civil Engineering, Hanoi University of Mining and Geology, 18 Pho Vien, Duc Thang, Hanoi 100000, Vietnam.
- Department of Bridge and Tunnel, Faculty of Civil Engineering, University of Transport Technology, 54 Trieu Khuc, Thanh Xuan, Hanoi 100000, Vietnam.
- Civil and Environmental Engineering Program, Graduate School of Advanced Science and Engineering, Hiroshima University, 1-4-1, Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8527, Japan.
ORCID-Profile: Tang Van Lam, May Huu Nguyen
Förderung
- Ministry of Education and Training of Vietnam (MOET)
Zitieren
APA
Lam, T. V., & Nguyen, M. H. (2023). Incorporating Industrial By-Products into Geopolymer Mortar: Effects on Strength and Durability. Materials, 16(12), 4406. https://doi.org/10.3390/ma16124406
Vancouver
Lam TV, Nguyen MH. Incorporating Industrial By-Products into Geopolymer Mortar: Effects on Strength and Durability. Materials. 2023;16(12):4406. doi:10.3390/ma16124406
BibTeX
@article{Lam2023,
author = {Lam, Tang Van and Nguyen, May Huu},
title = {Incorporating Industrial By-Products into Geopolymer Mortar: Effects on Strength and Durability},
journal = {Materials},
year = {2023},
volume = {16},
number = {12},
pages = {4406},
doi = {10.3390/ma16124406}
}
EUVIMED