Flexural Strength of CAD/CAM Lithium-Based Silicate Glass–Ceramics: A Narrative Review
Materials · 15.06.2023 · 16 (12) · 4398
DOI: 10.3390/ma16124398 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 15.06.2023. Verfasst von Alvaro Munoz und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Dentistry, University of Chile, Santiago 8380544, Chile. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Amongst chairside CAD/CAM materials, the use of lithium-based silicate glass–ceramics (LSGC) for indirect restorations has recently been increasing. Flexural strength is one of the most important parameters to consider in the clinical selection of materials. The aim of this paper is to review the flexural strength of LSGC and the methods used to measure it.
Methods
The electronic search was completed within PubMed database from 2 June 2011 to 2 June 2022. English-language papers investigating the flexural strength of IPS e.max CAD, Celtra Duo, Suprinity PC, and n!ce CAD/CAM blocks were included in the search strategy.
Results
From 211 potential articles, a total of 26 were identified for a comprehensive analysis. Categorization per material was carried out as follows: IPS e.max CAD (n = 27), Suprinity PC (n = 8), Celtra Duo (n = 6), and n!ce (n = 1). The three-point bending test (3-PBT) was used in 18 articles, followed by biaxial flexural test (BFT) in 10 articles, with one of these using the four-point bending test (4-PBT) as well. The most common specimen dimension was 14 × 4 × 1.2 mm (plates) for the 3-PBT and 12 × 1.2 mm (discs) for BFT. The flexural strength values for LSGC materials varied widely between the studies. Significance: As new LSGC materials are launched on the market, clinicians need to be aware of their flexural strength differences, which could influence the clinical performance of restorations.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Dentistry, University of Chile, Santiago 8380544, Chile.
- Dental Academy, University of Portsmouth, Portsmouth PO1 2QG, UK.
- Dental School, IRCCS San Raffaele Hospital, Vita-Salute University, 20132 Milan, Italy.
ORCID-Profile: Gaetano Paolone, Chris Louca
Zitieren
APA
Munoz, A., Zhao, Z., Paolone, G., Louca, C., & Vichi, A. (2023). Flexural Strength of CAD/CAM Lithium-Based Silicate Glass–Ceramics: A Narrative Review. Materials, 16(12), 4398. https://doi.org/10.3390/ma16124398
Vancouver
Munoz A, Zhao Z, Paolone G, Louca C, Vichi A. Flexural Strength of CAD/CAM Lithium-Based Silicate Glass–Ceramics: A Narrative Review. Materials. 2023;16(12):4398. doi:10.3390/ma16124398
BibTeX
@article{Munoz2023,
author = {Munoz, Alvaro and Zhao, Zejiao and Paolone, Gaetano and Louca, Chris and Vichi, Alessandro},
title = {Flexural Strength of CAD/CAM Lithium-Based Silicate Glass–Ceramics: A Narrative Review},
journal = {Materials},
year = {2023},
volume = {16},
number = {12},
pages = {4398},
doi = {10.3390/ma16124398}
}
EUVIMED