EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Study of Copper Powder Sintering for Porous Wick Structures with High Capillary Force

Im-Nam Jang, Yong-Sik Ahn iD

Materials · 07.06.2023 · 16 (12) · 4231

DOI: 10.3390/ma16124231 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.06.2023. Verfasst von Im-Nam Jang und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Pukyong National University, Busan 48547, Republic of Korea. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Development of a Cooling module for the Aircraft Data Transfer System (DTS) through the Ministry of Trade, Industry, and Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The porosity, permeability, and capillary force of porous sintered copper were examined in relation to the effects of copper powder size, pore-forming agent, and sintering conditions. Cu powder with particle sizes of 100 and 200 μm was mixed with pore-forming agents ranging from 15 to 45 weight percent, and the mixture was sintered in a vacuum tube furnace. Copper powder necks were formed at sintering temperatures higher than 900 °C. The porosity, as determined by the Archimedes measurement method, and the permeability performance of the sintered body displayed higher values when the Cu powder size was uniform or small. To investigate the capillary force of the sintered foam, a test was conducted using a raised meniscus test device. As more forming agent was added, the capillary force increased. It was also higher when the Cu powder size was larger and the size of the powders was not uniform. The result was discussed in relation to porosity and pore size distribution.

Schlagwörter

Stichwörter der Autor:innen

capillary forcepermeabilityporositysinteringwick

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Pukyong National University, Busan 48547, Republic of Korea.

ORCID-Profile: Yong-Sik Ahn

Förderung

  • Ministry of Trade, Industry and Energy
  • Development of a Cooling module for the Aircraft Data Transfer System (DTS) through the Ministry of Trade, Industry, and Energy

Zitieren

APA

Jang, I. N., & Ahn, Y. S. (2023). The Study of Copper Powder Sintering for Porous Wick Structures with High Capillary Force. Materials, 16(12), 4231. https://doi.org/10.3390/ma16124231

Vancouver

Jang IN, Ahn YS. The Study of Copper Powder Sintering for Porous Wick Structures with High Capillary Force. Materials. 2023;16(12):4231. doi:10.3390/ma16124231

BibTeX
@article{Jang2023,
  author = {Jang, Im-Nam and Ahn, Yong-Sik},
  title = {The Study of Copper Powder Sintering for Porous Wick Structures with High Capillary Force},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {12},
  pages = {4231},
  doi = {10.3390/ma16124231}
}
Kostenlos starten →