EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Laser Beam Profile on Thermal Transfer, Fluid Flow and Solidification Parameters during Laser-Based Directed Energy Deposition of Inconel 718

Bo Chen, Yanhua Bian, Zhiyong Li, Binxin Dong, Shaoxia Li iD, Chongxin Tian, Xiuli He, Gang Yu

Materials · 07.06.2023 · 16 (12) · 4221

DOI: 10.3390/ma16124221 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.06.2023. Verfasst von Bo Chen und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Research Project of Guangdong Aerospace Research Academy, High-level Innovation Research Institute Program of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The profile of the laser beam plays a significant role in determining the heat input on the deposition surface, further affecting the molten pool dynamics during laser-based directed energy deposition. The evolution of molten pool under two types of laser beam, super-Gaussian beam (SGB) and Gaussian beam (GB), was simulated using a three-dimensional numerical model. Two basic physical processes, the laser–powder interaction and the molten pool dynamics, were considered in the model. The deposition surface of the molten pool was calculated using the Arbitrary Lagrangian Eulerian moving mesh approach. Several dimensionless numbers were used to explain the underlying physical phenomena under different laser beams. Moreover, the solidification parameters were calculated using the thermal history at the solidification front. It is found that the peak temperature and liquid velocity in the molten pool under the SGB case were lower compared with those for the GB case. Dimensionless numbers analysis indicated that the fluid flow played a more pronounced role in heat transfer compared to conduction, especially in the GB case. The cooling rate was higher for the SGB case, indicating that the grain size could be finer compared with that for the GB case. Finally, the reliability of the numerical simulation was verified by comparing the computed and experimental clad geometry. The work provides a theoretical basis for understanding the thermal behavior and solidification characteristics under different laser input profile during directed energy deposition.

Schlagwörter

Stichwörter der Autor:innen

cooling ratedimensionless numberfluid flowlaser profilethermal behavior

Autor:innen und Institutionen

  • Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China.
  • Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100190, China.
  • School of Engineering Science, University of Chinese Academy of Sciences, Beijing 100190, China.
  • Guangdong Aerospace Research Academy, Guangzhou 511458, China.

ORCID-Profile: Shaoxia Li

Förderung

  • National Natural Science Foundation of China
  • Research Project of Guangdong Aerospace Research Academy
  • High-level Innovation Research Institute Program of Guangdong Province

Zitieren

APA

Chen, B., Bian, Y., Li, Z., Dong, B., Li, S., Tian, C., He, X., & Yu, G. (2023). Effect of Laser Beam Profile on Thermal Transfer, Fluid Flow and Solidification Parameters during Laser-Based Directed Energy Deposition of Inconel 718. Materials, 16(12), 4221. https://doi.org/10.3390/ma16124221

Vancouver

Chen B, Bian Y, Li Z, Dong B, Li S, Tian C, et al. Effect of Laser Beam Profile on Thermal Transfer, Fluid Flow and Solidification Parameters during Laser-Based Directed Energy Deposition of Inconel 718. Materials. 2023;16(12):4221. doi:10.3390/ma16124221

BibTeX
@article{Chen2023,
  author = {Chen, Bo and Bian, Yanhua and Li, Zhiyong and Dong, Binxin and Li, Shaoxia and Tian, Chongxin and He, Xiuli and Yu, Gang},
  title = {Effect of Laser Beam Profile on Thermal Transfer, Fluid Flow and Solidification Parameters during Laser-Based Directed Energy Deposition of Inconel 718},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {12},
  pages = {4221},
  doi = {10.3390/ma16124221}
}
Kostenlos starten →