EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Machine Learning-Based Predictive Model for Tensile and Flexural Strength of 3D-Printed Concrete

Ammar Ali, Raja Dilawar Riaz, Umair Jalil Malik iD, Syed Baqar Abbas iD, Muhammad Usman iD, Mati Ullah Shah iD, In-Ho Kim iD, Asad Hanif iD, Muhammad Faizan

Materials · 02.06.2023 · 16 (11) · 4149

DOI: 10.3390/ma16114149 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.06.2023. Verfasst von Ammar Ali und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Environmental Engineering (SCEE), National University of Sciences and Technology (NUST), H-12 Sector, Islamabad 44000, Pakistan. Die Arbeit wurde bisher 85-mal zitiert (Crossref) und nennt 178 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The additive manufacturing of concrete, also known as 3D-printed concrete, is produced layer by layer using a 3D printer. The three-dimensional printing of concrete offers several benefits compared to conventional concrete construction, such as reduced labor costs and wastage of materials. It can also be used to build complex structures with high precision and accuracy. However, optimizing the mix design of 3D-printed concrete is challenging, involving numerous factors and extensive hit-and-trail experimentation. This study addresses this issue by developing predictive models, such as the Gaussian Process Regression model, Decision Tree Regression model, Support Vector Machine model, and XGBoost Regression models. The input parameters were water (Kg/m3), cement (Kg/m3), silica fume (Kg/m3), fly ash (Kg/m3), coarse aggregate (Kg/m3 & mm for diameter), fine aggregate (Kg/m3 & mm for diameter), viscosity modifying agent (Kg/m3), fibers (Kg/m3), fiber properties (mm for diameter and MPa for strength), print speed (mm/sec), and nozzle area (mm2), while target properties were the flexural and tensile strength of concrete (MPa data from 25 literature studies were collected. The water/binder ratio used in the dataset ranged from 0.27 to 0.67. Different types of sands and fibers have been used, with fibers having a maximum length of 23 mm. Based upon the Coefficient of Determination (R2), Root Mean Square Error (RMSE), Mean Square Error (MSE), and Mean Absolute Error (MAE) for casted and printed concrete, the SVM model performed better than other models. All models’ cast and printed flexural strength values were also correlated. The model’s performance has also been checked on six different mix proportions from the dataset to show its accuracy. It is worth noting that the lack of ML-based predictive models for the flexural and tensile properties of 3D-printed concrete in the literature makes this study a novel innovation in the field. This model could reduce the computational and experimental effort required to formulate the mixed design of printed concrete.

Schlagwörter

Stichwörter der Autor:innen

3D-printed concreteadditive manufacturingdecision treeflexural strengthmachine learningpredictive models

Autor:innen und Institutionen

  • School of Civil and Environmental Engineering (SCEE), National University of Sciences and Technology (NUST), H-12 Sector, Islamabad 44000, Pakistan.
  • School of Electrical Engineering and Computer Science (SEECS), National University of Sciences and Technology (NUST), H-12 Sector, Islamabad 44000, Pakistan.
  • Department of Civil Engineering, Kunsan National University, Kunsan 54150, Republic of Korea.
  • Civil and Environmental Engineering Department, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran 31261, Saudi Arabia.
  • Interdisciplinary Research Center for Construction and Building Materials, King Fahd University of Petroleum and Minerals (KFUPM), Dhahran 31261, Saudi Arabia.

ORCID-Profile: Umair Jalil Malik, Syed Baqar Abbas, Muhammad Usman, Mati Ullah Shah, In-Ho Kim, Asad Hanif

Förderung

  • Ministry of Education

Zitieren

APA

Ali, A., Riaz, R. D., Malik, U. J., Abbas, S. B., Usman, M., Shah, M. U., Kim, I. H., Hanif, A., & Faizan, M. (2023). Machine Learning-Based Predictive Model for Tensile and Flexural Strength of 3D-Printed Concrete. Materials, 16(11), 4149. https://doi.org/10.3390/ma16114149

Vancouver

Ali A, Riaz RD, Malik UJ, Abbas SB, Usman M, Shah MU, et al. Machine Learning-Based Predictive Model for Tensile and Flexural Strength of 3D-Printed Concrete. Materials. 2023;16(11):4149. doi:10.3390/ma16114149

BibTeX
@article{Ali2023,
  author = {Ali, Ammar and Riaz, Raja Dilawar and Malik, Umair Jalil and Abbas, Syed Baqar and Usman, Muhammad and Shah, Mati Ullah and Kim, In-Ho and Hanif, Asad and Faizan, Muhammad},
  title = {Machine Learning-Based Predictive Model for Tensile and Flexural Strength of 3D-Printed Concrete},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {11},
  pages = {4149},
  doi = {10.3390/ma16114149}
}
Kostenlos starten →