EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Heat Treatment Optimization for a High Strength Al–Mn–Sc Alloy Fabricated by Selective Laser Melting

Hongyu Liu, Hao Zhang, Liju Meng, Yulong Li, Sheng Cao iD

Materials · 29.05.2023 · 16 (11) · 4054

DOI: 10.3390/ma16114054 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.05.2023. Verfasst von Hongyu Liu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, College of Engineering, Shantou University, Shantou 515063, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Special Fund Project for Science and Technology Innovation Strategy of Guangdong Province, Characteristic Innovation Project (Natural Science) for Regular University in Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A selective laser-melted Al–Mn–Sc alloy with 99.9% relative density has been obtained in this work through systematic process optimization. The as-fabricated specimen had the lowest hardness and strength, but the highest ductility. The aging response has shown that 300 °C/5 h is the peak aged condition, and it had the highest hardness, yield strength, ultimate tensile strength, and elongation at fracture. Such a high strength was attributed to the uniformly distributed nano-sized secondary Al3Sc precipitates. A further increase in aging temperature to 400 °C resulted in an over-aged condition, which contained a reduced volume fraction of secondary Al3Sc precipitates and resulted in a reduced strength.

Schlagwörter

Stichwörter der Autor:innen

Al–Mn–Sc alloyheat treatmenthigh strengthprecipitation hardeningselective laser melting

Autor:innen und Institutionen

  • Department of Mechanical Engineering, College of Engineering, Shantou University, Shantou 515063, China.
  • Faculty of Materials and Manufacturing, Beijing University of Technology, Beijing 100080, China.

ORCID-Profile: Sheng Cao

Förderung

  • National Natural Science Foundation of China
  • Special Fund Project for Science and Technology Innovation Strategy of Guangdong Province
  • Characteristic Innovation Project (Natural Science) for Regular University in Guangdong Province
  • Shantou University Research Foundation for Talents

Zitieren

APA

Liu, H., Zhang, H., Meng, L., Li, Y., & Cao, S. (2023). Heat Treatment Optimization for a High Strength Al–Mn–Sc Alloy Fabricated by Selective Laser Melting. Materials, 16(11), 4054. https://doi.org/10.3390/ma16114054

Vancouver

Liu H, Zhang H, Meng L, Li Y, Cao S. Heat Treatment Optimization for a High Strength Al–Mn–Sc Alloy Fabricated by Selective Laser Melting. Materials. 2023;16(11):4054. doi:10.3390/ma16114054

BibTeX
@article{Liu2023,
  author = {Liu, Hongyu and Zhang, Hao and Meng, Liju and Li, Yulong and Cao, Sheng},
  title = {Heat Treatment Optimization for a High Strength Al–Mn–Sc Alloy Fabricated by Selective Laser Melting},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {11},
  pages = {4054},
  doi = {10.3390/ma16114054}
}
Kostenlos starten →