Microstructure and Mechanical Properties of Weaving Wire and Arc Additive Manufactured AZ91 Magnesium Alloy Based on Cold Metal Transfer Technique
Materials · 29.05.2023 · 16 (11) · 4047
DOI: 10.3390/ma16114047 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 29.05.2023. Verfasst von Zhongrui Zhang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Tianjin Key Laboratory of Advanced Joining Technology, Tianjin University, Tianjin 300354, China. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Based on the cold metal transfer (CMT) technique, a deposited wall of AZ91 magnesium alloy was fabricated by weaving wire and arc additive manufacturing (WAAM), the shaping, microstructure, and mechanical properties of the sample with the weaving arc were characterized and discussed by compared with the sample without the weaving arc, and the effects of the weaving arc on grain refinement and property enhancement of the AZ91 component by CMT-WAAM process were investigated. After introducing the weaving arc, the effective rate of the deposited wall could be increased from 84.2% to 91.0%, and the temperature gradient of the molten pool could be reduced with an increase in constitutional undercooling. The equiaxed α-Mg grains became more equiaxial due to the dendrite remelting, and the β-Mg17Al12 phases distributed uniformly induced by the forced convection after introducing the weaving arc. Compared to the deposited component fabricated by the CMT-WAAM process without the weaving arc, the average ultimate tensile strength and elongation of the component by weaving the CMT-WAAM process both increased. The weaving CMT-WAAM component showed isotropy and has better performance than the traditional cast AZ91 alloy.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Tianjin Key Laboratory of Advanced Joining Technology, Tianjin University, Tianjin 300354, China.
- School of Materials Science and Engineering, Tianjin University, Tianjin 300354, China.
- International Institute for Innovative Design and Intelligent Manufacturing of Tianjin University, Shaoxing 312000, China.
- Beijing Hangxing Machinery Co., Ltd., Beijing 100013, China.
ORCID-Profile: Junqi Shen
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhang, Z., Shen, J., Bi, J., Hu, S., Zhen, Y., & Bu, X. (2023). Microstructure and Mechanical Properties of Weaving Wire and Arc Additive Manufactured AZ91 Magnesium Alloy Based on Cold Metal Transfer Technique. Materials, 16(11), 4047. https://doi.org/10.3390/ma16114047
Vancouver
Zhang Z, Shen J, Bi J, Hu S, Zhen Y, Bu X. Microstructure and Mechanical Properties of Weaving Wire and Arc Additive Manufactured AZ91 Magnesium Alloy Based on Cold Metal Transfer Technique. Materials. 2023;16(11):4047. doi:10.3390/ma16114047
BibTeX
@article{Zhang2023,
author = {Zhang, Zhongrui and Shen, Junqi and Bi, Ji and Hu, Shengsun and Zhen, Yahui and Bu, Xianzheng},
title = {Microstructure and Mechanical Properties of Weaving Wire and Arc Additive Manufactured AZ91 Magnesium Alloy Based on Cold Metal Transfer Technique},
journal = {Materials},
year = {2023},
volume = {16},
number = {11},
pages = {4047},
doi = {10.3390/ma16114047}
}
EUVIMED