EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Carbonated Bottom Slag Granules in 3D Concrete Printing

Karolina Butkute, Vitoldas Vaitkevicius, Maris Sinka iD, Algirdas Augonis iD, Aleksandrs Korjakins iD

Materials · 29.05.2023 · 16 (11) · 4045

DOI: 10.3390/ma16114045 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.05.2023. Verfasst von Karolina Butkute und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Civil Engineering and Architecture, Kaunas University of Technology, Studentų g. 48, 51367 Kaunas, Lithuania. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kaunas University of Technology, Riga Technical University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the possibility of utilising bottom slag (BS) waste from landfills, and a carbonation process advantageous for the use of artificial aggregates (AAs) in printed three-dimensional (3D) concrete composites. In general, the main idea of granulated aggregates is to reduce the amount of CO2 emissions of printed 3D concrete objects (wall). AAs are made from construction materials, both granulated and carbonated. Granules are made from a combination of binder (ordinary Portland cement (OPC), hydrated lime, burnt shale ash (BSA)) and waste material (BS). BS is a waste material left over after the municipal waste burning process in cogeneration power plants. Whole printed 3D concrete composite manufacturing consists of: granulating artificial aggregate, aggregate hardening and sieving (adaptive granulometer), carbonation of AA, mixing 3D concrete, and 3D printing. The granulating and printing processes were analysed for hardening processes, strength results, workability parameters, and physical and mechanical properties. Printings with no granules (reference 3D printed concrete) were compared to 3D printed concretes with 25% and 50% of their natural aggregate replaced with carbonated AA. The results showed that, theoretically, the carbonation process could help to react approximately 126 kg/m3 CO2 from 1 m3 of granules.

Schlagwörter

Stichwörter der Autor:innen

3D printingCO2 reductionartificial aggregatebottom slagburnt fly ash

Autor:innen und Institutionen

  • Faculty of Civil Engineering and Architecture, Kaunas University of Technology, Studentų g. 48, 51367 Kaunas, Lithuania.
  • Institute of Materials and Structures, Riga Technical University, Kipsala Street 6A, LV1048, Riga, Latvia.

ORCID-Profile: Maris Sinka, Algirdas Augonis, Aleksandrs Korjakins

Förderung

  • Kaunas University of Technology
  • Riga Technical University

Zitieren

APA

Butkute, K., Vaitkevicius, V., Sinka, M., Augonis, A., & Korjakins, A. (2023). Influence of Carbonated Bottom Slag Granules in 3D Concrete Printing. Materials, 16(11), 4045. https://doi.org/10.3390/ma16114045

Vancouver

Butkute K, Vaitkevicius V, Sinka M, Augonis A, Korjakins A. Influence of Carbonated Bottom Slag Granules in 3D Concrete Printing. Materials. 2023;16(11):4045. doi:10.3390/ma16114045

BibTeX
@article{Butkute2023,
  author = {Butkute, Karolina and Vaitkevicius, Vitoldas and Sinka, Maris and Augonis, Algirdas and Korjakins, Aleksandrs},
  title = {Influence of Carbonated Bottom Slag Granules in 3D Concrete Printing},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {11},
  pages = {4045},
  doi = {10.3390/ma16114045}
}
Kostenlos starten →