Preparation and Photocatalytic Performance of MoS2/MoO2 Composite Catalyst
Materials · 28.05.2023 · 16 (11) · 4030
DOI: 10.3390/ma16114030 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.05.2023. Verfasst von Daoyu Dong und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211800, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: priority academic program development of Jiangsu Higher Education Institution (PAPD).
Abstract (Originalsprache)
Solar energy is an inexhaustible clean energy providing a key solution to the dual challenges of energy and environmental crises. Graphite-like layered molybdenum disulfide (MoS2) is a promising photocatalytic material with three different crystal structures, 1T, 2H and 3R, each with distinct photoelectric properties. In this paper, 1T-MoS2 and 2H-MoS2, which are widely used in photocatalytic hydrogen evolution, were combined with MoO2 to form composite catalysts using a bottom-up one-step hydrothermal method. The microstructure and morphology of the composite catalysts were studied by XRD, SEM, BET, XPS and EIS. The prepared catalysts were used in the photocatalytic hydrogen evolution of formic acid. The results show that MoS2/MoO2 composite catalysts have an excellent catalytic effect on hydrogen evolution from formic acid. By analyzing the photocatalytic hydrogen production performance of composite catalysts, it suggests that the properties of MoS2 composite catalysts with different polymorphs are distinct, and different content of MoO2 also bring differences. Among the composite catalysts, 2H-MoS2/MoO2 composite catalysts with 48% MoO2 content show the best performance. The hydrogen yield is 960 µmol/h, which is 1.2 times pure 2H-MoS2 and two times pure MoO2. The hydrogen selectivity reaches 75%, which is 22% times higher than that of pure 2H-MoS2 and 30% higher than that of MoO2. The excellent performance of the 2H-MoS2/MoO2 composite catalyst is mainly due to the formation of the heterogeneous structure between MoS2 and MoO2, which improves the migration of photogenerated carriers and reduces the possibilities of recombination through the internal electric field. MoS2/MoO2 composite catalyst provides a cheap and efficient solution for photocatalytic hydrogen production from formic acid.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211800, China.
- State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing 211800, China.
ORCID-Profile: Zhigang Pan
Förderung
- priority academic program development of Jiangsu Higher Education Institution (PAPD)
Zitieren
APA
Dong, D., Yan, W., Tao, Y., Liu, Y., Lu, Y., & Pan, Z. (2023). Preparation and Photocatalytic Performance of MoS2/MoO2 Composite Catalyst. Materials, 16(11), 4030. https://doi.org/10.3390/ma16114030
Vancouver
Dong D, Yan W, Tao Y, Liu Y, Lu Y, Pan Z. Preparation and Photocatalytic Performance of MoS2/MoO2 Composite Catalyst. Materials. 2023;16(11):4030. doi:10.3390/ma16114030
BibTeX
@article{Dong2023,
author = {Dong, Daoyu and Yan, Weitao and Tao, Yaqiu and Liu, Yunfei and Lu, Yinong and Pan, Zhigang},
title = {Preparation and Photocatalytic Performance of MoS2/MoO2 Composite Catalyst},
journal = {Materials},
year = {2023},
volume = {16},
number = {11},
pages = {4030},
doi = {10.3390/ma16114030}
}
EUVIMED