EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Surface Properties of Fiber on Interface Properties of Carbon Fiber/Epoxy Resin and Its Graphene Oxide Modified Hybrid Composites

Weihua Bai, Wenjun Liu, Weidong Li, Zewen Lin, Hong Qiu, Xiaolan Hu

Materials · 26.05.2023 · 16 (11) · 4005

DOI: 10.3390/ma16114005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.05.2023. Verfasst von Weihua Bai und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials, Xiamen University, Xiamen 361005, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China;the Basic Scientific Research Program for National Defense, National Natural Science Foundation of China (NSFC), Basic Scientific Research Program for National Defense.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present study, surface properties of three types of carbon fibers (CCF300, CCM40J, and CCF800H) on the interface properties of carbon fiber/epoxy resin (CF/EP) were analyzed. The composites are further modified by graphene oxide (GO) to obtain GO/CF/EP hybrid composites. Meanwhile, the effect of the surface properties of CFs and the additive graphene oxide on the interlaminar shear properties and dynamic thermomechanical properties of GO/CF/EP hybrid composites are also analyzed. The results show that the higher surface oxygen-carbon ratio of carbon fiber (CCF300) has a positive effect on improving the glass transition temperature (Tg) of the CF/EP composites. The Tg of CCF300/EP is 184.4 °C, while the Tg of CCM40J/EP and CCF800/EP are only 177.1 °C and 177.4 °C, respectively. Furthermore, deeper and more dense grooves on the fiber surface (CCF800H and CCM40J) are more conducive to improving the interlaminar shear performance of the CF/EP composites. The interlaminar shear strength (ILSS) of CCF300/EP is 59.7 MPa, and that of CCM40J/EP and CCF800H/EP are 80.1 MPa and 83.5 MPa, respectively. For the GO/CF/EP hybrid composites, graphene oxide with abundant oxygen-containing groups is beneficial to improve the interfacial interaction. Graphene oxide can significantly improve the glass transition temperature and interlamellar shear strength of GO/CCF300/EP composites fabricated by CCF300 with a higher surface oxygen-carbon ratio. For the CCM40J and CCF800H with lower surface oxygen-carbon ratio, graphene oxide has a better modification effect on the glass transition temperature and interlamellar shear strength of GO/CCM40J/EP composites fabricated by CCM40J with deeper and finer surface grooves. Regardless of the type of carbon fiber, the GO/CF/EP hybrid composites with 0.1% graphene oxide have the optimized interlaminar shear strength, and the GO/CF/EP hybrid composites with 0.5% graphene oxide have the maximum glass transition temperature.

Schlagwörter

Stichwörter der Autor:innen

carbon fibercompositesgraphene oxideinterfacial propertysurface property

Autor:innen und Institutionen

  • College of Materials, Xiamen University, Xiamen 361005, China.
  • National Key Laboratory of Advanced Composites, AVIC Composite Technology Center, AVIC Composite Corporation Ltd., Beijing 101300, China.

Förderung

  • National Natural Science Foundation of China;the Basic Scientific Research Program for National Defense
  • National Natural Science Foundation of China (NSFC)
  • Basic Scientific Research Program for National Defense

Zitieren

APA

Bai, W., Liu, W., Li, W., Lin, Z., Qiu, H., & Hu, X. (2023). Effects of Surface Properties of Fiber on Interface Properties of Carbon Fiber/Epoxy Resin and Its Graphene Oxide Modified Hybrid Composites. Materials, 16(11), 4005. https://doi.org/10.3390/ma16114005

Vancouver

Bai W, Liu W, Li W, Lin Z, Qiu H, Hu X. Effects of Surface Properties of Fiber on Interface Properties of Carbon Fiber/Epoxy Resin and Its Graphene Oxide Modified Hybrid Composites. Materials. 2023;16(11):4005. doi:10.3390/ma16114005

BibTeX
@article{Bai2023,
  author = {Bai, Weihua and Liu, Wenjun and Li, Weidong and Lin, Zewen and Qiu, Hong and Hu, Xiaolan},
  title = {Effects of Surface Properties of Fiber on Interface Properties of Carbon Fiber/Epoxy Resin and Its Graphene Oxide Modified Hybrid Composites},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {11},
  pages = {4005},
  doi = {10.3390/ma16114005}
}
Kostenlos starten →