Durability of Plant Fiber Composites for Structural Application: A Brief Review
Materials · 25.05.2023 · 16 (11) · 3962
DOI: 10.3390/ma16113962 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 25.05.2023. Verfasst von Yunlong Jia und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Aerospace and Mechanical Engineering/Aviation, Changzhou Institute of Technology, Changzhou 213032, China. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 99 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Basic Science (Natural Science) Research Project of Colleges and Universities in Jiangsu Province, Changzhou Science and Technology Project.
Abstract (Originalsprache)
Environmental sustainability and eco-efficiency stand as imperative benchmarks for the upcoming era of materials. The use of sustainable plant fiber composites (PFCs) in structural components has garnered significant interest within industrial community. The durability of PFCs is an important consideration and needs to be well understood before their widespread application. Moisture/water aging, creep properties, and fatigue properties are the most critical aspects of the durability of PFCs. Currently, proposed approaches, such as fiber surface treatments, can alleviate the impact of water uptake on the mechanical properties of PFCs, but complete elimination seems impossible, thus limiting the application of PFCs in moist environments. Creep in PFCs has not received as much attention as water/moisture aging. Existing research has already found the significant creep deformation of PFCs due to the unique microstructure of plant fibers, and fortunately, strengthening fiber-matrix bonding has been reported to effectively improve creep resistance, although data remain limited. Regarding fatigue research in PFCs, most research focuses on tension-tension fatigue properties, but more attention is required on compression-related fatigue properties. PFCs have demonstrated a high endurance of one million cycles under a tension-tension fatigue load at 40% of their ultimate tensile strength (UTS), regardless of plant fiber type and textile architecture. These findings bolster confidence in the use of PFCs for structural applications, provided special measures are taken to alleviate creep and water absorption. This article outlines the current state of the research on the durability of PFCs in terms of the three critical factors mentioned above, and also discusses the associated improvement methods, with the hope that it can provide readers with a comprehensive overview of PFCs’ durability and highlight areas worthy of further research.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Aerospace and Mechanical Engineering/Aviation, Changzhou Institute of Technology, Changzhou 213032, China.
- Institute of Polymers and Composites, Hamburg University of Technology, D21073 Hamburg, Germany.
- Zhejiang Xingyu Autoparts Co., Ltd., Taizhou 317300, China.
- School of Materials Science and Engineering, Southeast University, Nanjing 211189, China.
- Wuxi Lintex Advanced Materials Co., Ltd., Wuxi 214145, China.
ORCID-Profile: Yunlong Jia, Bodo Fiedler, Peigen Zhang
Förderung
- Basic Science (Natural Science) Research Project of Colleges and Universities in Jiangsu Province
- Changzhou Science and Technology Project
Zitieren
APA
Jia, Y., Fiedler, B., Yang, W., Feng, X., Tang, J., Liu, J., & Zhang, P. (2023). Durability of Plant Fiber Composites for Structural Application: A Brief Review. Materials, 16(11), 3962. https://doi.org/10.3390/ma16113962
Vancouver
Jia Y, Fiedler B, Yang W, Feng X, Tang J, Liu J, et al. Durability of Plant Fiber Composites for Structural Application: A Brief Review. Materials. 2023;16(11):3962. doi:10.3390/ma16113962
BibTeX
@article{Jia2023,
author = {Jia, Yunlong and Fiedler, Bodo and Yang, Wenkai and Feng, Xinjian and Tang, Jingwen and Liu, Jian and Zhang, Peigen},
title = {Durability of Plant Fiber Composites for Structural Application: A Brief Review},
journal = {Materials},
year = {2023},
volume = {16},
number = {11},
pages = {3962},
doi = {10.3390/ma16113962}
}
EUVIMED