On the Influence of Heat Input on Ni-WC GMAW Hardfaced Coating Properties
Materials · 25.05.2023 · 16 (11) · 3960
DOI: 10.3390/ma16113960 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 25.05.2023. Verfasst von Jan Pawlik und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Krakow, Poland. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: reviewer voucher of authors.
Abstract (Originalsprache)
Hardfacing is one of the techniques used for part lifecycle elongation. Despite being used for over 100 years, there still is much to discover, as modern metallurgy provides more and more sophisticated alloys, which then have to be studied to find the best technological parameters in order to fully utilize complex material properties. One of the most efficient and versatile hardfacing approaches is Gas Metal Arc Welding technology (GMAW) and its cored-wire equivalent, known as FCAW (Flux-Cored/Cored Arc Welding). In this paper, the authors study the influence of heat input on the geometrical properties and hardness of stringer weld beads fabricated from cored wire consisting of macrocrystalline tungsten carbides in a nickel matrix. The aim is to establish a set of parameters which allow to manufacture wear-resistant overlays with high deposition rates, preserving all possible benefits of this heterogenic material. This study shows, that for a given diameter of the Ni-WC wire, there exists an upper limit of heat input beyond which the tungsten carbide crystals may exhibit undesired segregation at the root.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering and Robotics, AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Krakow, Poland.
- Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Krakow, Poland.
ORCID-Profile: Jan Pawlik, Michał Bembenek, Janusz Krawczyk, Aneta Łukaszek-Sołek
Förderung
- reviewer voucher of authors
Zitieren
APA
Pawlik, J., Bembenek, M., Góral, T., Cieślik, J., Krawczyk, J., Łukaszek-Sołek, A., Śleboda, T., & Frocisz, Ł. (2023). On the Influence of Heat Input on Ni-WC GMAW Hardfaced Coating Properties. Materials, 16(11), 3960. https://doi.org/10.3390/ma16113960
Vancouver
Pawlik J, Bembenek M, Góral T, Cieślik J, Krawczyk J, Łukaszek-Sołek A, et al. On the Influence of Heat Input on Ni-WC GMAW Hardfaced Coating Properties. Materials. 2023;16(11):3960. doi:10.3390/ma16113960
BibTeX
@article{Pawlik2023,
author = {Pawlik, Jan and Bembenek, Michał and Góral, Tomasz and Cieślik, Jacek and Krawczyk, Janusz and Łukaszek-Sołek, Aneta and Śleboda, Tomasz and Frocisz, Łukasz},
title = {On the Influence of Heat Input on Ni-WC GMAW Hardfaced Coating Properties},
journal = {Materials},
year = {2023},
volume = {16},
number = {11},
pages = {3960},
doi = {10.3390/ma16113960}
}
EUVIMED