EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study on Lap-Spliced Performance of High-Strength Stainless Steel Wire Mesh in Engineering Cementitious Composites

Xuyan Zou, Xiyuan Zhang, Ziyuan Li, Juntao Zhu iD

Materials · 25.05.2023 · 16 (11) · 3959

DOI: 10.3390/ma16113959 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.05.2023. Verfasst von Xuyan Zou und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Zhengzhou University of Technology, Zhengzhou 450044, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundations of China, Housing and urban and rural Construction Science and Technology Program of Henan Province, Ministry of housing and urban rural development science and technology program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the mechanical properties of high-strength stainless steel wire mesh (HSSSWM) in Engineering Cementitious Composites (ECCs) and determine a reasonable lap length, a total of 39 specimens in 13 sets were designed and fabricated by considering the diameter of the steel strand, spacing of the transverse steel strand, and lap length. The lap-spliced performance of the specimens was tested through a pull-out test. The results revealed two failure modes in the lap connection of steel wire mesh in ECCs: pull-out failure and rupture failure. The spacing of the transverse steel strand had little effect on the ultimate pull-out force, but it restricted the slip of the longitudinal steel strand. A positive correlation was found between the spacing of the transverse steel strand and the slip amount of the longitudinal steel strand. With an increase in lap length, the slip amount and ‘lap stiffness’ to peak load increased, while the ultimate bond strength decreased. Based on the experimental analysis, a calculation formula for lap strength considering the correction coefficient β was established.

Schlagwörter

Stichwörter der Autor:innen

Engineering Cementitious Composites (ECCs)high-strength stainless steel wire mesh (HSSSWM)lap strengthlap-spliced performancepull-out test

Autor:innen und Institutionen

  • School of Civil Engineering, Zhengzhou University of Technology, Zhengzhou 450044, China.
  • School of Water Conservancy and Civil Engineering, Zhengzhou University, Zhengzhou 450001, China.

ORCID-Profile: Juntao Zhu

Förderung

  • National Natural Science Foundations of China
  • Housing and urban and rural Construction Science and Technology Program of Henan Province
  • Ministry of housing and urban rural development science and technology program
  • Ministry of Housing and Urban–Rural Development Science and Technology Program

Zitieren

APA

Zou, X., Zhang, X., Li, Z., & Zhu, J. (2023). Experimental Study on Lap-Spliced Performance of High-Strength Stainless Steel Wire Mesh in Engineering Cementitious Composites. Materials, 16(11), 3959. https://doi.org/10.3390/ma16113959

Vancouver

Zou X, Zhang X, Li Z, Zhu J. Experimental Study on Lap-Spliced Performance of High-Strength Stainless Steel Wire Mesh in Engineering Cementitious Composites. Materials. 2023;16(11):3959. doi:10.3390/ma16113959

BibTeX
@article{Zou2023,
  author = {Zou, Xuyan and Zhang, Xiyuan and Li, Ziyuan and Zhu, Juntao},
  title = {Experimental Study on Lap-Spliced Performance of High-Strength Stainless Steel Wire Mesh in Engineering Cementitious Composites},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {11},
  pages = {3959},
  doi = {10.3390/ma16113959}
}
Kostenlos starten →