EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Examination of the Corrosion Behavior of Shape Memory NiTi Material for Biomedical Applications

Aboujaila A M Soltan, İsmail Esen iD, Seyit Ali Kara iD, Hayrettin Ahlatçı iD

Materials · 25.05.2023 · 16 (11) · 3951

DOI: 10.3390/ma16113951 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 25.05.2023. Verfasst von Aboujaila A M Soltan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering, Engineering Faculty, Karabuk University, Karabuk 78050, Turkey. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, corrosion and wear tests of NiTi alloy (Ni 55%–Ti 45%) samples, known as shape memory alloy, which offer a shape recovery memory effect between memory temperatures ranging from 25 to 35 °C, have been carried out. The standard metallographically prepared samples’ microstructure images were obtained using an optical microscope device and SEM with an EDS analyzer. For the corrosion test, the samples are immersed with a net into the beaker of synthetic body fluid, whose contact with the standard air is cut off. Electrochemical corrosion analyses were performed after potentiodynamic testing in synthetic body fluid and at room temperature. The wear tests of the investigated NiTi superalloy were carried out by performing reciprocal wear tests under 20 N and 40 N loads in a dry environment and body fluid. During wear, a 100CR6-quality steel ball of the counter material was rubbed on the sample surface for a total of 300 m with a unit line length of 13 mm and a sliding speed of 0.04 m/s. As a result of both the potentiodynamic polarization and immersion corrosion tests in the body fluid, an average of 50% thickness reduction in the samples was observed in proportion to the change in the corrosion current values. In addition, the weight loss of the samples in corrosive wear is 20% less than that in dry wear. This can be attributed to the protective effect of the oxide film on the surface at high loads and the effect of reducing the friction coefficient of the body fluid.

Schlagwörter

Stichwörter der Autor:innen

corrosionmemory alloymicrostructurenitinolwear

Autor:innen und Institutionen

  • Mechanical Engineering, Engineering Faculty, Karabuk University, Karabuk 78050, Turkey.
  • Material and Metallurgy Metallurgy Engineering, Engineering Faculty, Karabuk University, Karabuk 78050, Turkey.

ORCID-Profile: İsmail Esen, Seyit Ali Kara, Hayrettin Ahlatçı

Zitieren

APA

Soltan, A. A. M., Esen, İ., Kara, S. A., & Ahlatçı, H. (2023). Examination of the Corrosion Behavior of Shape Memory NiTi Material for Biomedical Applications. Materials, 16(11), 3951. https://doi.org/10.3390/ma16113951

Vancouver

Soltan AAM, Esen İ, Kara SA, Ahlatçı H. Examination of the Corrosion Behavior of Shape Memory NiTi Material for Biomedical Applications. Materials. 2023;16(11):3951. doi:10.3390/ma16113951

BibTeX
@article{Soltan2023,
  author = {Soltan, Aboujaila A M and Esen, İsmail and Kara, Seyit Ali and Ahlatçı, Hayrettin},
  title = {Examination of the Corrosion Behavior of Shape Memory NiTi Material for Biomedical Applications},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {11},
  pages = {3951},
  doi = {10.3390/ma16113951}
}
Kostenlos starten →