A Review on Sustainable Inks for Printed Electronics: Materials for Conductive, Dielectric and Piezoelectric Sustainable Inks
Materials · 24.05.2023 · 16 (11) · 3940
DOI: 10.3390/ma16113940 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 24.05.2023. Verfasst von Leire Sanchez-Duenas und 6 weiteren Autor:innen. Beteiligte Einrichtung: Surface Chemistry & Nanotechnologies Unit, Fundación Tekniker, Inaki Goenaga 5, 20600 Eibar, Spain. Die Arbeit wurde bisher 88-mal zitiert (Crossref) und nennt 103 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, Basque Government.
Abstract (Originalsprache)
In the last decades, the demand for electronics and, therefore, electronic waste, has increased. To reduce this electronic waste and the impact of this sector on the environment, it is necessary to develop biodegradable systems using naturally produced materials with low impact on the environment or systems that can degrade in a certain period. One way to manufacture these types of systems is by using printed electronics because the inks and the substrates used are sustainable. Printed electronics involve different methods of deposition, such as screen printing or inkjet printing. Depending on the method of deposition selected, the developed inks should have different properties, such as viscosity or solid content. To produce sustainable inks, it is necessary to ensure that most of the materials used in the formulation are biobased, biodegradable, or not considered critical raw materials. In this review, different inks for inkjet printing or screen printing that are considered sustainable, and the materials that can be used to formulate them, are collected. Printed electronics need inks with different functionalities, which can be mainly classified into three groups: conductive, dielectric, or piezoelectric inks. Materials need to be selected depending on the ink’s final purpose. For example, functional materials such as carbon or biobased silver should be used to secure the conductivity of an ink, a material with dielectric properties could be used to develop a dielectric ink, or materials that present piezoelectric properties could be mixed with different binders to develop a piezoelectric ink. A good combination of all the components selected must be achieved to ensure the proper features of each ink.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Surface Chemistry & Nanotechnologies Unit, Fundación Tekniker, Inaki Goenaga 5, 20600 Eibar, Spain.
- Electronics and Communications Unit, Fundación Tekniker, Inaki Goenaga 5, 20600 Eibar, Spain.
- Department of Physical Chemistry, Faculty of Science and Technology, University of the Basque Country, UPV/EHU, Barrio Sarriena s/n, 48940 Leioa, Spain.
ORCID-Profile: Leire Sanchez-Duenas, Mikel Larrañaga, Miren Blanco, José Luis Vilas-Vilela
Förderung
- European Union
- Basque Government
Zitieren
APA
Sanchez-Duenas, L., Gomez, E., Larrañaga, M., Blanco, M., Goitandia, A. M., Aranzabe, E., & Vilas-Vilela, J. L. (2023). A Review on Sustainable Inks for Printed Electronics: Materials for Conductive, Dielectric and Piezoelectric Sustainable Inks. Materials, 16(11), 3940. https://doi.org/10.3390/ma16113940
Vancouver
Sanchez-Duenas L, Gomez E, Larrañaga M, Blanco M, Goitandia AM, Aranzabe E, et al. A Review on Sustainable Inks for Printed Electronics: Materials for Conductive, Dielectric and Piezoelectric Sustainable Inks. Materials. 2023;16(11):3940. doi:10.3390/ma16113940
BibTeX
@article{SanchezDuenas2023,
author = {Sanchez-Duenas, Leire and Gomez, Estibaliz and Larrañaga, Mikel and Blanco, Miren and Goitandia, Amaia M and Aranzabe, Estibaliz and Vilas-Vilela, José Luis},
title = {A Review on Sustainable Inks for Printed Electronics: Materials for Conductive, Dielectric and Piezoelectric Sustainable Inks},
journal = {Materials},
year = {2023},
volume = {16},
number = {11},
pages = {3940},
doi = {10.3390/ma16113940}
}
EUVIMED