EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of MSR-B Mg Alloy Surface Preparation on Bonding Properties

Katarzyna Łyczkowska, Damian Miara, Beata Rams, Janusz Adamiec iD, Katarzyna Baluch iD

Materials · 22.05.2023 · 16 (10) · 3887

DOI: 10.3390/ma16103887 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.05.2023. Verfasst von Katarzyna Łyczkowska und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Materials Engineering, Silesian University of Technology, Krasińskiego 8, 40-019 Katowice, Poland. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Silesian University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, industrial adhesives are replacing conventional bonding methods in many industries, including the automotive, aviation, and power industries, among others. The continuous development of joining technology has promoted adhesive bonding as one of the basic methods of joining metal materials. This article presents the influence of surface preparation of magnesium alloys on the strength properties of a single-lap adhesive joint using a one-component epoxy adhesive. The samples were subjected to shear strength tests and metallographic observations. The lowest properties of the adhesive joint were obtained on samples degreased with isopropyl alcohol. The lack of surface treatment before joining led to destruction by adhesive and mixed mechanisms. Higher properties were obtained for samples ground with sandpaper. The depressions created as a result of grinding increased the contact area of the adhesive with the magnesium alloys. The highest properties were noticed for samples after sandblasting. This proved that the development of the surface layer and the formation of larger grooves increased both the shear strength and the resistance of the adhesive bonding to fracture toughness. It was found that the method of surface preparation had a significant influence on the resulting failure mechanism, and the adhesive bonding of the casting of magnesium alloy QE22 can be used successfully.

Schlagwörter

Stichwörter der Autor:innen

MSR-B/QE22/(MgAg2RE2Zr)adhesive bondingadhesive layermagnesium alloyone-component epoxysurface treatments

Autor:innen und Institutionen

  • Faculty of Materials Engineering, Silesian University of Technology, Krasińskiego 8, 40-019 Katowice, Poland.
  • Łukasiewicz Research Network-Institute of Welding, 44-100 Gliwice, Poland.

ORCID-Profile: Janusz Adamiec, Katarzyna Baluch

Förderung

  • Silesian University of Technology

Zitieren

APA

Łyczkowska, K., Miara, D., Rams, B., Adamiec, J., & Baluch, K. (2023). The Influence of MSR-B Mg Alloy Surface Preparation on Bonding Properties. Materials, 16(10), 3887. https://doi.org/10.3390/ma16103887

Vancouver

Łyczkowska K, Miara D, Rams B, Adamiec J, Baluch K. The Influence of MSR-B Mg Alloy Surface Preparation on Bonding Properties. Materials. 2023;16(10):3887. doi:10.3390/ma16103887

BibTeX
@article{yczkowska2023,
  author = {Łyczkowska, Katarzyna and Miara, Damian and Rams, Beata and Adamiec, Janusz and Baluch, Katarzyna},
  title = {The Influence of MSR-B Mg Alloy Surface Preparation on Bonding Properties},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {10},
  pages = {3887},
  doi = {10.3390/ma16103887}
}
Kostenlos starten →