Comparative Analysis of Bone Ingrowth in 3D-Printed Titanium Lattice Structures with Different Patterns
Materials · 20.05.2023 · 16 (10) · 3861
DOI: 10.3390/ma16103861 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 20.05.2023. Verfasst von Ágnes Éva Kovács und 12 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Biomechanics, Department of Orthopaedic Surgery, Faculty of Medicine, University of Debrecen, H-4032 Debrecen, Hungary. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research, Development and Innovation Office, European Union and the Government of Hungary, European Union, the Government of Hungary.
Abstract (Originalsprache)
In this study, metal 3D printing technology was used to create lattice-shaped test specimens of orthopedic implants to determine the effect of different lattice shapes on bone ingrowth. Six different lattice shapes were used: gyroid, cube, cylinder, tetrahedron, double pyramid, and Voronoi. The lattice-structured implants were produced from Ti6Al4V alloy using direct metal laser sintering 3D printing technology with an EOS M290 printer. The implants were implanted into the femoral condyles of sheep, and the animals were euthanized 8 and 12 weeks after surgery. To determine the degree of bone ingrowth for different lattice-shaped implants, mechanical, histological, and image processing tests on ground samples and optical microscopic images were performed. In the mechanical test, the force required to compress the different lattice-shaped implants and the force required for a solid implant were compared, and significant differences were found in several instances. Statistically evaluating the results of our image processing algorithm, it was found that the digitally segmented areas clearly consisted of ingrown bone tissue; this finding is also supported by the results of classical histological processing. Our main goal was realized, so the bone ingrowth efficiencies of the six lattice shapes were ranked. It was found that the gyroid, double pyramid, and cube-shaped lattice implants had the highest degree of bone tissue growth per unit time. This ranking of the three lattice shapes remained the same at both 8 and 12 weeks after euthanasia. In accordance with the study, as a side project, a new image processing algorithm was developed that proved suitable for determining the degree of bone ingrowth in lattice implants from optical microscopic images. Along with the cube lattice shape, whose high bone ingrowth values have been previously reported in many studies, it was found that the gyroid and double pyramid lattice shapes produced similarly good results.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory of Biomechanics, Department of Orthopaedic Surgery, Faculty of Medicine, University of Debrecen, H-4032 Debrecen, Hungary.
- Department of Pathology, Faculty of Medicine, University of Debrecen, H-4032 Debrecen, Hungary.
- Isotoptech Private Limited Company, H-4026 Debrecen, Hungary.
- Department of Data Science and Visualization, Faculty of Informatics, University of Debrecen, H-4028 Debrecen, Hungary.
- Varinex Private Limited Company, H-1141 Budapest, Hungary.
ORCID-Profile: Loránd Csámer, Balázs Harangi
Förderung
- National Research, Development and Innovation Office
- European Union and the Government of Hungary
- European Union, the Government of Hungary
- Hungarian National Research, Development and Innovation Fund
Zitieren
APA
Kovács, Á. É., Csernátony, Z., Csámer, L., Méhes, G., Szabó, D., Veres, M., Braun, M., Harangi, B., Serbán, N., Zhang, L., Falk, G., Soósné Horváth, H., & Manó, S. (2023). Comparative Analysis of Bone Ingrowth in 3D-Printed Titanium Lattice Structures with Different Patterns. Materials, 16(10), 3861. https://doi.org/10.3390/ma16103861
Vancouver
Kovács ÁÉ, Csernátony Z, Csámer L, Méhes G, Szabó D, Veres M, et al. Comparative Analysis of Bone Ingrowth in 3D-Printed Titanium Lattice Structures with Different Patterns. Materials. 2023;16(10):3861. doi:10.3390/ma16103861
BibTeX
@article{Kovcs2023,
author = {Kovács, Ágnes Éva and Csernátony, Zoltán and Csámer, Loránd and Méhes, Gábor and Szabó, Dániel and Veres, Mihály and Braun, Mihály and Harangi, Balázs and Serbán, Norbert and Zhang, Lei and Falk, György and Soósné Horváth, Hajnalka and Manó, Sándor},
title = {Comparative Analysis of Bone Ingrowth in 3D-Printed Titanium Lattice Structures with Different Patterns},
journal = {Materials},
year = {2023},
volume = {16},
number = {10},
pages = {3861},
doi = {10.3390/ma16103861}
}
EUVIMED