EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Modified Constitutive Model and Microstructure Characterization for 2195 Al-Li Alloy Hot Extrusion

Hui Li, Jian Wang, Yuanchun Huang, Rong Fu

Materials · 18.05.2023 · 16 (10) · 3826

DOI: 10.3390/ma16103826 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.05.2023. Verfasst von Hui Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The quality of extruded profiles depends largely on accurate constitutive models and thermal processing maps. In this study, a modified Arrhenius constitutive model for homogenized 2195 Al-Li alloy with multi-parameter co-compensation was developed and further enhanced the prediction accuracy of flow stresses. Through the processing map and microstructure characterization, the 2195 Al-Li alloy could be deformed optimally at the temperature range of 710~783 K and strain rate of 0.001~0.12 s−1, preventing the occurrence of local plastic flow and abnormal growth of recrystallized grains. The accuracy of the constitutive model was verified through numerical simulation of 2195 Al-Li alloy extruded profiles with large shaped cross-sections. Dynamic recrystallization occurred at different regions during the practical extrusion process, resulting in slight variations in the microstructure. The differences in microstructure were due to the varying degrees of temperature and stress experienced by the material in different regions.

Schlagwörter

Stichwörter der Autor:innen

2195 Al-Li alloyconstitutive modelextrusion numerical simulationmicrostructure

Autor:innen und Institutionen

  • College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.
  • State Key Laboratory of High-Performance Complex Manufacturing, Central South University, Changsha 410083, China.
  • Southwest Aluminum (Group) Co., Ltd., Chongqing 400050, China.
  • Light Alloy Research Institute, Central South University, Changsha 410083, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, H., Wang, J., Huang, Y., & Fu, R. (2023). A Modified Constitutive Model and Microstructure Characterization for 2195 Al-Li Alloy Hot Extrusion. Materials, 16(10), 3826. https://doi.org/10.3390/ma16103826

Vancouver

Li H, Wang J, Huang Y, Fu R. A Modified Constitutive Model and Microstructure Characterization for 2195 Al-Li Alloy Hot Extrusion. Materials. 2023;16(10):3826. doi:10.3390/ma16103826

BibTeX
@article{Li2023,
  author = {Li, Hui and Wang, Jian and Huang, Yuanchun and Fu, Rong},
  title = {A Modified Constitutive Model and Microstructure Characterization for 2195 Al-Li Alloy Hot Extrusion},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {10},
  pages = {3826},
  doi = {10.3390/ma16103826}
}
Kostenlos starten →