EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Different Crystallization Behavior of Amorphous ITO Film by Rapid Infrared Annealing and Conventional Furnace Annealing Technology

Jiaming Li, Liangbao Jiang, Xiaoyu Li, Junjie Luo, Jiaxi Liu, Minbo Wang, Yue Yan

Materials · 18.05.2023 · 16 (10) · 3803

DOI: 10.3390/ma16103803 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.05.2023. Verfasst von Jiaming Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: Baimtec Material Co., Ltd., Beijing Institute of Aeronautical Materials, Beijing 100095, China. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An amorphous indium tin oxide (ITO) film (Ar/O2 = 80:0.5) was heated to 400 °C and maintained for 1–9 min using rapid infrared annealing (RIA) technology and conventional furnace annealing (CFA) technology. The effect of holding time on the structure, optical and electrical properties, and crystallization kinetics of ITO films, and on the mechanical properties of the chemically strengthened glass substrates, were revealed. The results show that the nucleation rate of ITO films produced by RIA is higher and the grain size is smaller than for CFA. When the RIA holding time exceeds 5 min, the sheet resistance of the ITO film is basically stable (8.75 Ω/sq). The effect of holding time on the mechanical properties of chemically strengthened glass substrates annealed using RIA technology is less than that of CFA technology. The percentage of compressive-stress decline of the strengthened glass after annealing using RIA technology is only 12–15% of that using CFA technology. For improving the optical and electrical properties of the amorphous ITO thin films, and the mechanical properties of the chemically strengthened glass substrates, RIA technology is more efficient than CFA technology.

Schlagwörter

Stichwörter der Autor:innen

ITO filmRIAannealingcrystallizationholding time

Autor:innen und Institutionen

  • Baimtec Material Co., Ltd., Beijing Institute of Aeronautical Materials, Beijing 100095, China.
  • Beijing Engineering Research Center of Advanced Structural Transparencies to the Modern Traffic System, Beijing 100095, China.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, J., Jiang, L., Li, X., Luo, J., Liu, J., Wang, M., & Yan, Y. (2023). Different Crystallization Behavior of Amorphous ITO Film by Rapid Infrared Annealing and Conventional Furnace Annealing Technology. Materials, 16(10), 3803. https://doi.org/10.3390/ma16103803

Vancouver

Li J, Jiang L, Li X, Luo J, Liu J, Wang M, et al. Different Crystallization Behavior of Amorphous ITO Film by Rapid Infrared Annealing and Conventional Furnace Annealing Technology. Materials. 2023;16(10):3803. doi:10.3390/ma16103803

BibTeX
@article{Li2023,
  author = {Li, Jiaming and Jiang, Liangbao and Li, Xiaoyu and Luo, Junjie and Liu, Jiaxi and Wang, Minbo and Yan, Yue},
  title = {Different Crystallization Behavior of Amorphous ITO Film by Rapid Infrared Annealing and Conventional Furnace Annealing Technology},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {10},
  pages = {3803},
  doi = {10.3390/ma16103803}
}
Kostenlos starten →