EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

β→α Phase Transformation and Properties of Solid-State-Sintered SiC Ceramics with TaC Addition

Shiyi Zheng iD, Buhao Zhang, Xuejian Liu, Zhongming Chen, Zhengren Huang, Jie Yin

Materials · 17.05.2023 · 16 (10) · 3787

DOI: 10.3390/ma16103787 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.05.2023. Verfasst von Shiyi Zheng und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of High Performance Ceramics and Superfine Microstructures, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shangha…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Shanghai Sailing Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dense SiC-based composite ceramics were fabricated by means of the ex situ addition of TaC using solid-state spark plasma sintering (SPS). Commercially available β-SiC and TaC powders were chosen as raw materials. Electron backscattered diffraction (EBSD) analysis was conducted to investigate the grain boundary mapping of SiC-TaC composite ceramics. With the increase in TaC, the misorientation angles of the α-SiC phase shifted to a relatively small range. It was deduced that the ex situ pinning stress from TaC greatly suppressed the growth of α-SiC grains. The low β→α transformability of the specimen with the composition of SiC-20 vol.% TaC (ST-4) implied that a possible microstructure of newly nucleated α-SiC embedded within metastable β-SiC grains, which could have been responsible for the improvement in strength and fracture toughness. The as-sintered SiC-20 vol.% TaC (ST-4) composite ceramic had a relative density of 98.0%, a bending strength of 708.8 ± 28.7 MPa, a fracture toughness of 8.3 ± 0.8 MPa·m1/2, an elastic modulus of 384.9 ± 28.3 GPa and a Vickers hardness of 17.5 ± 0.4 GPa.

Schlagwörter

Stichwörter der Autor:innen

carbidesphase transformationsolid-state sinteringstrengthtoughness

Autor:innen und Institutionen

  • State Key Laboratory of High Performance Ceramics and Superfine Microstructures, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China.
  • School of Physical Science and Technology, ShanghaiTech University, Shanghai 201210, China.
  • Faculty of Engineering, University of Nottingham, Nottingham NG7 2RD, UK.
  • Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China.

ORCID-Profile: Shiyi Zheng

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China
  • Shanghai Sailing Program

Zitieren

APA

Zheng, S., Zhang, B., Liu, X., Chen, Z., Huang, Z., & Yin, J. (2023). β→α Phase Transformation and Properties of Solid-State-Sintered SiC Ceramics with TaC Addition. Materials, 16(10), 3787. https://doi.org/10.3390/ma16103787

Vancouver

Zheng S, Zhang B, Liu X, Chen Z, Huang Z, Yin J. β→α Phase Transformation and Properties of Solid-State-Sintered SiC Ceramics with TaC Addition. Materials. 2023;16(10):3787. doi:10.3390/ma16103787

BibTeX
@article{Zheng2023,
  author = {Zheng, Shiyi and Zhang, Buhao and Liu, Xuejian and Chen, Zhongming and Huang, Zhengren and Yin, Jie},
  title = {β→α Phase Transformation and Properties of Solid-State-Sintered SiC Ceramics with TaC Addition},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {10},
  pages = {3787},
  doi = {10.3390/ma16103787}
}
Kostenlos starten →