EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Reinforcement Ratio and Bond Characteristic on Flexural Behavior of Carbon Textile-Reinforced Concrete Panels

Jun-Mo Yang iD, Jongeok Lee, Chunho Chang

Materials · 12.05.2023 · 16 (10) · 3703

DOI: 10.3390/ma16103703 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.05.2023. Verfasst von Jun-Mo Yang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Keimyung University, 1095 Dalgubeol-daero, Dalseo-gu, Daegu 42601, Republic of Korea. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Keimyung University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Textile-reinforced concrete (TRC) is highly anticipated as an alternative to reinforced concrete due to its ability to enable lightweight design, free formability, and improved ductility. In this study, TRC panel test specimens were fabricated and four-point loading flexural tests were performed to examine the flexural characteristics of TRC panels reinforced with carbon fabric, and to investigate the effect of the fabric reinforcement ratio, anchorage length, and surface treatment of fabric. Furthermore, the flexural behavior of the test specimens was numerically analyzed using the general section analysis concept of reinforced concrete and compared with the experimental results. Due to bond failure between the carbon fabric and the concrete matrix, the TRC panel showed a large decrease in flexural performance in terms of flexural stiffness, flexural strength, cracking behavior, and deflection. This low performance was improved by increasing the fabric reinforcement ratio, anchoring length, and sand–epoxy surface treatment of the anchorage. Comparing the numerical calculation results with the experimental results, the deflection of the experimental results was approximately 50% larger than the numerical calculation results. This is because the perfect bond between the carbon fabric and the concrete matrix failed, and slip occurred.

Schlagwörter

Stichwörter der Autor:innen

bondcarbon fabricflexural behaviorreinforcement ratiotextile-reinforced concrete

Autor:innen und Institutionen

  • Department of Civil Engineering, Keimyung University, 1095 Dalgubeol-daero, Dalseo-gu, Daegu 42601, Republic of Korea.

ORCID-Profile: Jun-Mo Yang

Förderung

  • Keimyung University

Zitieren

APA

Yang, J. M., Lee, J., & Chang, C. (2023). Effect of Reinforcement Ratio and Bond Characteristic on Flexural Behavior of Carbon Textile-Reinforced Concrete Panels. Materials, 16(10), 3703. https://doi.org/10.3390/ma16103703

Vancouver

Yang JM, Lee J, Chang C. Effect of Reinforcement Ratio and Bond Characteristic on Flexural Behavior of Carbon Textile-Reinforced Concrete Panels. Materials. 2023;16(10):3703. doi:10.3390/ma16103703

BibTeX
@article{Yang2023,
  author = {Yang, Jun-Mo and Lee, Jongeok and Chang, Chunho},
  title = {Effect of Reinforcement Ratio and Bond Characteristic on Flexural Behavior of Carbon Textile-Reinforced Concrete Panels},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {10},
  pages = {3703},
  doi = {10.3390/ma16103703}
}
Kostenlos starten →