EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study on the Influence of Wire-Saw Wear on Cutting Force and Silicon Wafer Surface

Lie Liang, Shujuan Li, Kehao Lan, Ruijiang Yu, Jiabin Wang, Wen Zhao

Materials · 09.05.2023 · 16 (10) · 3619

DOI: 10.3390/ma16103619 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.05.2023. Verfasst von Lie Liang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shaanxi Province Key Research and Development Plan Project of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hard and brittle materials such as monocrystalline silicon still occupy an important position in the semiconductor industry, but hard and brittle materials are difficult to process because of their physical properties. Fixed-diamond abrasive wire-saw cutting is the most widely used method for slicing hard and brittle materials. The diamond abrasive particles on the wire saw wear to a certain extent, which affects the cutting force and wafer surface quality in the cutting process. In this experiment, keeping all the given parameters unchanged, a square silicon ingot is cut repeatedly with a consolidated diamond abrasive wire saw until the wire saw breaks. The experimental results show that the cutting force decreases with the increase in cutting times in the stable grinding stage. The wear of abrasive particles starts at the edges and corners, and the macro failure mode of the wire saw is fatigue fracture. The fluctuation of the wafer surface profile gradually decreases. The surface roughness of wafer is steady during the wear steady stage, and the large damage pits on the wafer surface are reduced in the whole process of cutting.

Schlagwörter

Stichwörter der Autor:innen

cutting forcefailure modesurface profilesurface roughnesswearwire saw

Autor:innen und Institutionen

  • School of Mechanical and Precision Instrument Engineering, Xi'an University of Technology, Xi'an 710048, China.

Förderung

  • National Natural Science Foundation of China
  • Shaanxi Province Key Research and Development Plan Project of China

Zitieren

APA

Liang, L., Li, S., Lan, K., Yu, R., Wang, J., & Zhao, W. (2023). Experimental Study on the Influence of Wire-Saw Wear on Cutting Force and Silicon Wafer Surface. Materials, 16(10), 3619. https://doi.org/10.3390/ma16103619

Vancouver

Liang L, Li S, Lan K, Yu R, Wang J, Zhao W. Experimental Study on the Influence of Wire-Saw Wear on Cutting Force and Silicon Wafer Surface. Materials. 2023;16(10):3619. doi:10.3390/ma16103619

BibTeX
@article{Liang2023,
  author = {Liang, Lie and Li, Shujuan and Lan, Kehao and Yu, Ruijiang and Wang, Jiabin and Zhao, Wen},
  title = {Experimental Study on the Influence of Wire-Saw Wear on Cutting Force and Silicon Wafer Surface},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {10},
  pages = {3619},
  doi = {10.3390/ma16103619}
}
Kostenlos starten →