EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication and Arc Erosion Behavior of Ag-SnO2-ZnO Electrical Contact Materials

Danny Guzmán iD, Felipe González iD, Diego Muranda, Claudio Aguilar iD, Alexis Guzmán iD, Álvaro Soliz iD, Lorena Lozada, Iñigo Iturriza, Felipe Castro iD

Materials · 09.05.2023 · 16 (10) · 3618

DOI: 10.3390/ma16103618 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.05.2023. Verfasst von Danny Guzmán und 8 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ingeniería en Metalurgia, Universidad de Atacama, Av. Copayapu 485, Copiapó 1530000, Chile. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fondo Nacional de Desarrollo Científico y Tecnológico, FONDECYT, Chile, FONDECYT.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated the synthesis of Ag-SnO2-ZnO by powder metallurgy methods and their subsequent electrical contact behavior. The pieces of Ag-SnO2-ZnO were prepared by ball milling and hot pressing. The arc erosion behavior of the material was evaluated using homemade equipment. The microstructure and phase evolution of the materials were investigated through X-ray diffraction, energy-dispersive spectroscopy and scanning electron microscopy. The results showed that, although the mass loss of the Ag-SnO2-ZnO composite (9.08 mg) during the electrical contact test was higher than that of the commercial Ag-CdO (1.42 mg), its electrical conductivity remained constant (26.9 ± 1.5% IACS). This fact would be related to the reaction of Zn2SnO4’s formation on the material’s surface via electric arc. This reaction would play an important role in controlling the surface segregation and subsequent loss of electrical conductivity of this type of composite, thus enabling the development of a new electrical contact material to replace the non-environmentally friendly Ag-CdO composite.

Schlagwörter

Stichwörter der Autor:innen

Ag-SnO2-ZnO compositeselectrical contact materialshot pressing

Autor:innen und Institutionen

  • Departamento de Ingeniería en Metalurgia, Universidad de Atacama, Av. Copayapu 485, Copiapó 1530000, Chile.
  • Departamento de Ingeniería Metalúrgica y de Materiales, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso 2340000, Chile.
  • Centro de Estudios e Investigaciones Técnicas de Gipuzkoa (CEIT-IK4), 20018 San Sebastián, Spain.
  • Departamento de Ingeniería Metalúrgica, Universidad de Santiago de Chile, Av. Lib. B. O'Higgins 3363, Santiago 9160000, Chile.

ORCID-Profile: Danny Guzmán, Felipe González, Claudio Aguilar, Alexis Guzmán, Álvaro Soliz, Felipe Castro

Förderung

  • Fondo Nacional de Desarrollo Científico y Tecnológico, FONDECYT, Chile
  • FONDECYT

Zitieren

APA

Guzmán, D., González, F., Muranda, D., Aguilar, C., Guzmán, A., Soliz, Á., Lozada, L., Iturriza, I., & Castro, F. (2023). Fabrication and Arc Erosion Behavior of Ag-SnO2-ZnO Electrical Contact Materials. Materials, 16(10), 3618. https://doi.org/10.3390/ma16103618

Vancouver

Guzmán D, González F, Muranda D, Aguilar C, Guzmán A, Soliz Á, et al. Fabrication and Arc Erosion Behavior of Ag-SnO2-ZnO Electrical Contact Materials. Materials. 2023;16(10):3618. doi:10.3390/ma16103618

BibTeX
@article{Guzmn2023,
  author = {Guzmán, Danny and González, Felipe and Muranda, Diego and Aguilar, Claudio and Guzmán, Alexis and Soliz, Álvaro and Lozada, Lorena and Iturriza, Iñigo and Castro, Felipe},
  title = {Fabrication and Arc Erosion Behavior of Ag-SnO2-ZnO Electrical Contact Materials},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {10},
  pages = {3618},
  doi = {10.3390/ma16103618}
}
Kostenlos starten →