EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure Evolution and Mechanical Response of a Direct Quenched and Partitioned Steel at Different Finishing Rolling Temperatures

Yajun Liu, Xiaolong Gan iD, Wen Liang, Guang Xu iD, Jianghua Qi, Man Liu

Materials · 06.05.2023 · 16 (9) · 3575

DOI: 10.3390/ma16093575 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.05.2023. Verfasst von Yajun Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: The State Key Laboratory of Refractories and Metallurgy, Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wu…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Nature Science Foundation of China, Hubei Provincial Department of Education Scientific Research Plan Guidance Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effects of finishing rolling temperature on the microstructure and mechanical properties of a direct quenched and partitioned (DQ&P) steel were investigated by a thermal simulation machine, a field emission scanning electron microscope (FE-SEM), electron backscattering diffraction (EBSD), and a transmission electron microscope (TEM). The results show that the original austenite grain size was refined by 31% as the finishing rolling temperature decreased from 920 °C to 840 °C, leading to the formation of the finest martensite lath at 840 °C. At the same time, the lower finishing rolling temperature resulted in a higher dislocation density, and consequently improved the stability of the retained austenite. Moreover, compared to the conventional Q&P process, the comprehensive mechanical properties of a steel with similar chemical composition can be enhanced by DQ&P processing. With the decrease of finishing rolling temperature from 920 °C to 840 °C, the strength and total elongation increases. The yield strength, tensile strength, and total elongation reach the maximum values of 1121 MPa, 1134 MPa, and 11.7%, respectively, at 840 °C.

Schlagwörter

Stichwörter der Autor:innen

direct quenched and partitioned steelfinishing rolling temperaturegrain sizelath martensiteresidual austenite

Autor:innen und Institutionen

  • The State Key Laboratory of Refractories and Metallurgy, Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan 430081, China.
  • Technical Center, Hunan Valin Lianyuan Iron and Steel Co., Ltd., Loudi 417009, China.

ORCID-Profile: Xiaolong Gan, Guang Xu

Förderung

  • National Nature Science Foundation of China
  • Hubei Provincial Department of Education Scientific Research Plan Guidance Project

Zitieren

APA

Liu, Y., Gan, X., Liang, W., Xu, G., Qi, J., & Liu, M. (2023). Microstructure Evolution and Mechanical Response of a Direct Quenched and Partitioned Steel at Different Finishing Rolling Temperatures. Materials, 16(9), 3575. https://doi.org/10.3390/ma16093575

Vancouver

Liu Y, Gan X, Liang W, Xu G, Qi J, Liu M. Microstructure Evolution and Mechanical Response of a Direct Quenched and Partitioned Steel at Different Finishing Rolling Temperatures. Materials. 2023;16(9):3575. doi:10.3390/ma16093575

BibTeX
@article{Liu2023,
  author = {Liu, Yajun and Gan, Xiaolong and Liang, Wen and Xu, Guang and Qi, Jianghua and Liu, Man},
  title = {Microstructure Evolution and Mechanical Response of a Direct Quenched and Partitioned Steel at Different Finishing Rolling Temperatures},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {9},
  pages = {3575},
  doi = {10.3390/ma16093575}
}
Kostenlos starten →