HD-SiO2/SiO2 Sol@PDMS Superhydrophobic Coating with Good Durability and Anti-Corrosion for Protection of Al Sheets
Materials · 05.05.2023 · 16 (9) · 3532
DOI: 10.3390/ma16093532 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 05.05.2023. Verfasst von Ruohan Xia und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science & Engineering, Nanjing Tech University, 30 South PuZhu Road, Nanjing 211816, China. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites, Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD), Nanjing Naxin New Material Co., Ltd..
Abstract (Originalsprache)
Superhydrophobic coatings with excellent water-repellent properties imply a wide range of application areas. However, improvements are needed in terms of stability and complex processing procedures. In the present study, a superhydrophobic coating on Al sheets was prepared by mixing hexadecyltrimethoxysilane (HDTMS)-modified SiO2 nanoparticles and acid-catalyzed silica sols (HD-SiO2/SiO2 Sol) with polydimethylsiloxane (PDMS) binder. The HD-SiO2 nanoparticles and acid-catalyzed silica sol (SiO2 sol) form a binary graded micro-nanostructure, providing excellent superhydrophobicity (Water Contact Angle = 158.5°, Sliding angle = 0°). Superhydrophobic coatings with excellent water-repellent properties have potential for corrosion prevention. However the commonly used organic resins have poor chemical and mechanical properties. In the present study, the results of outdoor exposure for 30 days, immersion in acid and alkaline solutions for 24 h, grit abrasion, and water impact experiments, respectively, showed that the prepared superhydrophobic coating has good wear resistance. The integrated superhydrophobic coating on the Al sheets exhibited good corrosion inhibition with an efficiency (η) of 98.9%, which is much higher than that of the uncoated sheets. The present study provides a promising approach for producing stable superhydrophobic coatings at a low cost, with the potential to supplant conventional organic resin anti-corrosion coatings.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science & Engineering, Nanjing Tech University, 30 South PuZhu Road, Nanjing 211816, China.
Förderung
- Jiangsu Collaborative Innovation Center for Advanced Inorganic Function Composites
- Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)
- Nanjing Naxin New Material Co., Ltd.
Zitieren
APA
Xia, R., Zhang, B., Dong, K., Yan, Y., & Guan, Z. (2023). HD-SiO2/SiO2 Sol@PDMS Superhydrophobic Coating with Good Durability and Anti-Corrosion for Protection of Al Sheets. Materials, 16(9), 3532. https://doi.org/10.3390/ma16093532
Vancouver
Xia R, Zhang B, Dong K, Yan Y, Guan Z. HD-SiO2/SiO2 Sol@PDMS Superhydrophobic Coating with Good Durability and Anti-Corrosion for Protection of Al Sheets. Materials. 2023;16(9):3532. doi:10.3390/ma16093532
BibTeX
@article{Xia2023,
author = {Xia, Ruohan and Zhang, Bing and Dong, Kousuo and Yan, Yao and Guan, Zisheng},
title = {HD-SiO2/SiO2 Sol@PDMS Superhydrophobic Coating with Good Durability and Anti-Corrosion for Protection of Al Sheets},
journal = {Materials},
year = {2023},
volume = {16},
number = {9},
pages = {3532},
doi = {10.3390/ma16093532}
}
EUVIMED