EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation of Densified Fine-Grain High-Frequency MnZn Ferrite Using the Cold Sintering Process

Yao Ying, Linghuo Hu, Zhaocheng Li, Jingwu Zheng, Jing Yu, Wangchang Li, Liang Qiao iD, Wei Cai, Juan Li, Daxin Bao, Shenglei Che iD

Materials · 28.04.2023 · 16 (9) · 3454

DOI: 10.3390/ma16093454 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.04.2023. Verfasst von Yao Ying und 10 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Intergovernmental International Science, Technology and Innovation Cooperation Key Project of the National Key R&D Programme, National Natural Science Foundation of China, Intergovernmental International Science, Technology and Innovation Cooperation Key Project of the National Key R&D Programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The densified MnZn ferrite ceramics were prepared using the cold sintering process under pressure, with an acetate ethanol solution used as the transient solvent. The effects of the transient solvent, the pressure and annealing temperature on the density, and the micromorphology and magnetic properties of the sintered MnZn ferrites were studied. The densified MnZn ferrite was obtained using the cold sintering process and its relative density reached up to 85.4%. The transient solvent and high pressure are essential to the cold sintering process for MnZn ferrite. The annealing treatment is indispensable in obtaining the sample with the higher density. The relative density was further increased to 97.2% for the sample annealed at 950 °C for 6 h. The increase in the annealing temperature reduces the power loss at high frequencies.

Schlagwörter

Stichwörter der Autor:innen

MnZn ferritecold sintering processhigh frequencypower loss

Autor:innen und Institutionen

  • College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, China.
  • Research Center of Magnetic and Electronic Materials, Zhejiang University of Technology, Hangzhou 310014, China.
  • Hengdian Group DMEGC Magnetics Co., Ltd., Dongyang 322118, China.

ORCID-Profile: Liang Qiao, Shenglei Che

Förderung

  • Intergovernmental International Science, Technology and Innovation Cooperation Key Project of the National Key R&D Programme
  • National Natural Science Foundation of China
  • Intergovernmental International Science, Technology and Innovation Cooperation Key Project of the National Key R&D Programme

Zitieren

APA

Ying, Y., Hu, L., Li, Z., Zheng, J., Yu, J., Li, W., Qiao, L., Cai, W., Li, J., Bao, D., & Che, S. (2023). Preparation of Densified Fine-Grain High-Frequency MnZn Ferrite Using the Cold Sintering Process. Materials, 16(9), 3454. https://doi.org/10.3390/ma16093454

Vancouver

Ying Y, Hu L, Li Z, Zheng J, Yu J, Li W, et al. Preparation of Densified Fine-Grain High-Frequency MnZn Ferrite Using the Cold Sintering Process. Materials. 2023;16(9):3454. doi:10.3390/ma16093454

BibTeX
@article{Ying2023,
  author = {Ying, Yao and Hu, Linghuo and Li, Zhaocheng and Zheng, Jingwu and Yu, Jing and Li, Wangchang and Qiao, Liang and Cai, Wei and Li, Juan and Bao, Daxin and Che, Shenglei},
  title = {Preparation of Densified Fine-Grain High-Frequency MnZn Ferrite Using the Cold Sintering Process},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {9},
  pages = {3454},
  doi = {10.3390/ma16093454}
}
Kostenlos starten →