Mechanical Properties and Energy Absorption Abilities of Diamond TPMS Cylindrical Structures Fabricated by Selective Laser Melting with 316L Stainless Steel
Materials · 18.04.2023 · 16 (8) · 3196
DOI: 10.3390/ma16083196 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 18.04.2023. Verfasst von Dorota Laskowska und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Koszalin University of Technology, Śniadeckich 2, 75-620 Koszalin, Poland. Die Arbeit wurde bisher 50-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Triply periodic minimal surfaces (TPMS) are structures inspired by nature with unique properties. Numerous studies confirm the possibility of using TPMS structures for heat dissipation, mass transport, and biomedical and energy absorption applications. In this study, the compressive behavior, overall deformation mode, mechanical properties, and energy absorption ability of Diamond TPMS cylindrical structures produced by selective laser melting of 316L stainless steel powder were investigated. Based on the experimental studies, it was found that tested structures exhibited different cell strut deformation mechanisms (bending-dominated and stretch-dominated) and overall deformation modes (uniform and “layer-by-layer”) depending on structural parameters. Consequently, the structural parameters had an impact on the mechanical properties and the energy absorption ability. The evaluation of basic absorption parameters shows the advantage of bending-dominated Diamond TPMS cylindrical structures in comparison with stretch-dominated Diamond TPMS cylindrical structures. However, their elastic modulus and yield strength were lower. Comparative analysis with the author’s previous work showed a slight advantage for bending-dominated Diamond TPMS cylindrical structures in comparison with Gyroid TPMS cylindrical structures. The results of this research can be used to design and manufacture more efficient, lightweight components for energy absorption applications in the fields of healthcare, transportation, and aerospace.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, Koszalin University of Technology, Śniadeckich 2, 75-620 Koszalin, Poland.
ORCID-Profile: Dorota Laskowska, Tomasz Szatkiewicz, Błażej Bałasz
Zitieren
APA
Laskowska, D., Szatkiewicz, T., Bałasz, B., & Mitura, K. (2023). Mechanical Properties and Energy Absorption Abilities of Diamond TPMS Cylindrical Structures Fabricated by Selective Laser Melting with 316L Stainless Steel. Materials, 16(8), 3196. https://doi.org/10.3390/ma16083196
Vancouver
Laskowska D, Szatkiewicz T, Bałasz B, Mitura K. Mechanical Properties and Energy Absorption Abilities of Diamond TPMS Cylindrical Structures Fabricated by Selective Laser Melting with 316L Stainless Steel. Materials. 2023;16(8):3196. doi:10.3390/ma16083196
BibTeX
@article{Laskowska2023,
author = {Laskowska, Dorota and Szatkiewicz, Tomasz and Bałasz, Błażej and Mitura, Katarzyna},
title = {Mechanical Properties and Energy Absorption Abilities of Diamond TPMS Cylindrical Structures Fabricated by Selective Laser Melting with 316L Stainless Steel},
journal = {Materials},
year = {2023},
volume = {16},
number = {8},
pages = {3196},
doi = {10.3390/ma16083196}
}
EUVIMED