Wet–Dry Cycles and Microstructural Characteristics of Expansive Subgrade Treated with Sustainable Cementitious Waste Materials
Materials · 15.04.2023 · 16 (8) · 3124
DOI: 10.3390/ma16083124 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.04.2023. Verfasst von Samuel J Abbey und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, College of Arts, Technology and Environment, University of the West of England, Bristol BS16 1QY, UK. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This work presents an experimental study on the physico-mechanical and microstructural characteristics of stabilised soils and the effect of wetting and drying cycles on their durability as road subgrade materials. The durability of expansive road subgrade with a high plasticity index treated with different ratios of ground granulated blast furnace slag (GGBS) and brick dust waste (BDW) was investigated. Treated and cured samples of the expansive subgrade were subjected to wetting–drying cycles, California bearing ratio (CBR) tests, and microstructural analysis. The results show a gradual reduction in the California bearing ratio (CBR), mass, and the resilient modulus of samples for all subgrade types as the number of cycles increases. The treated subgrades containing 23.5% GGBS recorded the highest CBR value of 230% under dry conditions while the lowest CBR value of 15% (wetting cycle) was recorded for the subgrade treated with 11.75% GGBS and 11.75% BDW at the end of the wetting–drying cycles, both of which find useful application in road pavement construction as calcium silicate hydrate (CSH) gel was formed in all stabilised subgrade materials. However, the increase in alumina and silica content upon the inclusion of BDW initiated the formation of more cementitious products due to the increased availability of Si and Al species as indicated by EDX analysis. This study concluded that subgrade materials treated with a combination of GGBS and BDW are durable, sustainable and suitable for use in road construction.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Engineering, College of Arts, Technology and Environment, University of the West of England, Bristol BS16 1QY, UK.
- Centre for Architecture and Built Environment Research (CABER), College of Arts, Technology and Environment, University of the West of England, Bristol BS16 1QY, UK.
ORCID-Profile: Samuel J Abbey, Samuel Y O Amakye, Colin A Booth, Jeremiah J Jeremiah
Zitieren
APA
Abbey, S. J., Amakye, S. Y. O., Eyo, E. U., Booth, C. A., & Jeremiah, J. J. (2023). Wet–Dry Cycles and Microstructural Characteristics of Expansive Subgrade Treated with Sustainable Cementitious Waste Materials. Materials, 16(8), 3124. https://doi.org/10.3390/ma16083124
Vancouver
Abbey SJ, Amakye SYO, Eyo EU, Booth CA, Jeremiah JJ. Wet–Dry Cycles and Microstructural Characteristics of Expansive Subgrade Treated with Sustainable Cementitious Waste Materials. Materials. 2023;16(8):3124. doi:10.3390/ma16083124
BibTeX
@article{Abbey2023,
author = {Abbey, Samuel J and Amakye, Samuel Y O and Eyo, Eyo U and Booth, Colin A and Jeremiah, Jeremiah J},
title = {Wet–Dry Cycles and Microstructural Characteristics of Expansive Subgrade Treated with Sustainable Cementitious Waste Materials},
journal = {Materials},
year = {2023},
volume = {16},
number = {8},
pages = {3124},
doi = {10.3390/ma16083124}
}
EUVIMED