Carbonation of Alkali-Activated Materials: A Review
Materials · 13.04.2023 · 16 (8) · 3086
DOI: 10.3390/ma16083086 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 13.04.2023. Verfasst von Ghandy Lamaa und 3 weiteren Autor:innen. Beteiligte Einrichtung: CERIS (Civil Engineering Research and Innovation for Sustainability), Civil Engineering, Architecture and Georresources Department, Instituto Superio…. Die Arbeit wurde bisher 87-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, Foundation for Science and Technology.
Abstract (Originalsprache)
This paper presents a literature review on the effects of accelerated carbonation on alkali-activated materials. It attempts to provide a greater understanding of the influence of CO2 curing on the chemical and physical properties of various types of alkali-activated binders used in pastes, mortars, and concrete. Several aspects related to changes in chemistry and mineralogy have been carefully identified and discussed, including depth of CO2 interaction, sequestration, reactions with calcium-based phases (e.g., calcium hydroxide and calcium silicate hydrates and calcium aluminosilicate hydrates), as well as other aspects related to the chemical composition of alkali-activated materials. Emphasis has also been given to physical alterations such as volumetric changes, density, porosity, and other microstructural properties caused by induced carbonation. Moreover, this paper reviews the influence of the accelerated carbonation curing method on the strength development of alkali-activated materials, which has been awarded little attention considering its potential. This curing technique was found to contribute to the strength development mainly through decalcification of the Ca phases existing in the alkali-activated precursor, leading to the formation of CaCO3, which leads to microstructural densification. Interestingly, this curing method seems to have much to offer in terms of mechanical performance, making it an attractive curing solution that can compensate for the loss in performance caused by less efficient alkali-activated binders replacing Portland cement. Optimising the application of such CO2-based curing methods for each of the potential alkali-activated binders is recommended for future studies for maximum microstructural improvement, and thus mechanical enhancement, to make some of the “low-performing binders” adequate Portland cement substitutes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- CERIS (Civil Engineering Research and Innovation for Sustainability), Civil Engineering, Architecture and Georresources Department, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisbon,…
ORCID-Profile: Ghandy Lamaa, Rui Vasco Silva, Jorge de Brito
Förderung
- Fundação para a Ciência e Tecnologia
- Foundation for Science and Technology
Zitieren
APA
Lamaa, G., Duarte, A. P. C., Silva, R. V., & de Brito, J. (2023). Carbonation of Alkali-Activated Materials: A Review. Materials, 16(8), 3086. https://doi.org/10.3390/ma16083086
Vancouver
Lamaa G, Duarte APC, Silva RV, de Brito J. Carbonation of Alkali-Activated Materials: A Review. Materials. 2023;16(8):3086. doi:10.3390/ma16083086
BibTeX
@article{Lamaa2023,
author = {Lamaa, Ghandy and Duarte, António P C and Silva, Rui Vasco and de Brito, Jorge},
title = {Carbonation of Alkali-Activated Materials: A Review},
journal = {Materials},
year = {2023},
volume = {16},
number = {8},
pages = {3086},
doi = {10.3390/ma16083086}
}
EUVIMED