EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modifying Water–Frost Resistance and Mechanical Properties of Lime Mortar Using Siliceous and Fluidised Bed Fly Combusted Ashes Activated with Cement

Dominik Logoń iD, Janusz Kobaka iD, Jacek Domski iD

Materials · 11.04.2023 · 16 (8) · 3013

DOI: 10.3390/ma16083013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 11.04.2023. Verfasst von Dominik Logoń und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Civil Engineering, Wroclaw University of Science and Technology, Wybrzeże Wyspianskiego 27, 50-370 Wroclaw, Poland. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The research focuses on pozzolanic additives, which are compatible with traditional lime mortars, and enable the modification of the rheological, physical and mechanical properties of tested composites. It was noted that lime mortars with fluidised bed fly ash require sand without impurities to avoid possible ettringite crystallisation. The work presents siliceous fly ash and fluidised bed combustion fly ash to modify the frost resistance and mechanical properties of traditional lime mortars with and without the addition of cement. The results show better effects using fluidised bed ash. Traditional Portland cement CEM I 42.5R was used to activate ash and increase the results. The possibility of a significant improvement of properties is indicated with a hybrid addition to the lime binder of 15–30% ash (siliceous or fluidised bed ash) and 15–30% cement. Changing the class and type of cement provides an additional opportunity to alter the properties of the composites. For architectural reasons relating to colour, the suitability of lighter fluidised bed ash instead of darker siliceous ash and of white Portland cement instead of the traditional grey cement can be used. The proposed mortars can be the basis for future modifications with admixtures and additives, e.g., metakaolin, polymers, fibres, slag, glass powder and impregnating agents.

Schlagwörter

Stichwörter der Autor:innen

cementfrost resistancelime mortarmechanical propertiessiliceous and fluidised bed fly ashes

Autor:innen und Institutionen

  • Faculty of Civil Engineering, Wroclaw University of Science and Technology, Wybrzeże Wyspianskiego 27, 50-370 Wroclaw, Poland.
  • Faculty of Geoengineering, University of Warmia and Mazury in Olsztyn, Prawochenskiego Street 15, 10-720 Olsztyn, Poland.
  • Faculty of Civil Engineering, Environmental and Geodetic Sciences, Koszalin University of Technology, Śniadeckich Street 2, 75-453 Koszalin, Poland.

ORCID-Profile: Dominik Logoń, Janusz Kobaka, Jacek Domski

Zitieren

APA

Logoń, D., Kobaka, J., & Domski, J. (2023). Modifying Water–Frost Resistance and Mechanical Properties of Lime Mortar Using Siliceous and Fluidised Bed Fly Combusted Ashes Activated with Cement. Materials, 16(8), 3013. https://doi.org/10.3390/ma16083013

Vancouver

Logoń D, Kobaka J, Domski J. Modifying Water–Frost Resistance and Mechanical Properties of Lime Mortar Using Siliceous and Fluidised Bed Fly Combusted Ashes Activated with Cement. Materials. 2023;16(8):3013. doi:10.3390/ma16083013

BibTeX
@article{Logo2023,
  author = {Logoń, Dominik and Kobaka, Janusz and Domski, Jacek},
  title = {Modifying Water–Frost Resistance and Mechanical Properties of Lime Mortar Using Siliceous and Fluidised Bed Fly Combusted Ashes Activated with Cement},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {8},
  pages = {3013},
  doi = {10.3390/ma16083013}
}
Kostenlos starten →