EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Strain Rate on Hydrogen-Assisted Deformation Behavior and Microstructure in AISI 316L Austenitic Stainless Steel

Elena Astafurova iD, Anastasiya Fortuna, Evgenii Melnikov, Sergey Astafurov

Materials · 09.04.2023 · 16 (8) · 2983

DOI: 10.3390/ma16082983 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.04.2023. Verfasst von Elena Astafurova und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences, 634055 Tomsk, Russia. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Russian Academy of Sciences, Government research assignment for ISPMS SB RAS.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The influence of strain rate in the interval of (10−5–10−3) 1/s on room temperature tensile behavior, dislocation arrangement, deformation mechanisms, and fracture of austenitic stainless steel AISI 316L electrochemically charged with hydrogen was investigated. Independently on strain rate, hydrogen charging provides the increase in the yield strength of the specimens due to a solid solution hardening of austenite, but it slightly influences deformation behavior and strain hardening of the steel. Simultaneously, hydrogen charging assists surface embrittlement of the specimens during straining and reduces an elongation to failure, which both are strain rate-dependent parameters. Hydrogen embrittlement index decreases with increase in strain rate, which testifies the importance of hydrogen transport with dislocations during plastic deformation. The stress–relaxation tests directly confirm the hydrogen-enhanced increase in the dislocation dynamics at low strain rates. The interaction of the hydrogen atoms with dislocations and hydrogen-associated plastic flow are discussed.

Schlagwörter

Stichwörter der Autor:innen

austenitic stainless steelfracturehydrogen embrittlementmicrostructurestrain hardeningstrain rate

Autor:innen und Institutionen

  • Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences, 634055 Tomsk, Russia.
  • Department of Physical Materials Science, National University of Science and Technology MISiS, 119049 Moscow, Russia.

ORCID-Profile: Elena Astafurova

Förderung

  • Russian Academy of Sciences
  • Government research assignment for ISPMS SB RAS

Zitieren

APA

Astafurova, E., Fortuna, A., Melnikov, E., & Astafurov, S. (2023). The Effect of Strain Rate on Hydrogen-Assisted Deformation Behavior and Microstructure in AISI 316L Austenitic Stainless Steel. Materials, 16(8), 2983. https://doi.org/10.3390/ma16082983

Vancouver

Astafurova E, Fortuna A, Melnikov E, Astafurov S. The Effect of Strain Rate on Hydrogen-Assisted Deformation Behavior and Microstructure in AISI 316L Austenitic Stainless Steel. Materials. 2023;16(8):2983. doi:10.3390/ma16082983

BibTeX
@article{Astafurova2023,
  author = {Astafurova, Elena and Fortuna, Anastasiya and Melnikov, Evgenii and Astafurov, Sergey},
  title = {The Effect of Strain Rate on Hydrogen-Assisted Deformation Behavior and Microstructure in AISI 316L Austenitic Stainless Steel},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {8},
  pages = {2983},
  doi = {10.3390/ma16082983}
}
Kostenlos starten →