EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Probabilistic Modelling of Fracture Toughness of Composites with Discontinuous Reinforcement

Grzegorz Mieczkowski iD, Tadeusz Szymczak iD, Dariusz Szpica iD, Andrzej Borawski iD

Materials · 07.04.2023 · 16 (8) · 2962

DOI: 10.3390/ma16082962 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.04.2023. Verfasst von Grzegorz Mieczkowski und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Bialystok University of Technology, 45C Wiejska Str., 15-351 Bialystok, Poland. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of Poland with allocation to the Faculty of Mechanical Engineering Bialystok University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The results presented in the paper are related to the prediction of the effective fracture toughness of particulate composites (KICeff). KICeff was determined using a probabilistic model supported by a cumulative probability function qualitatively following the Weibull distribution. Using this approach, it was possible to model two-phase composites with an arbitrarily defined volume fraction of each phase. The predicted value of the effective fracture toughness of the composite was determined based on the mechanical parameter of the reinforcement (fracture toughness), matrix (fracture toughness, Young’s modulus, yield stress), and composite (Young’s modulus, yield stress). The proposed method was validated: the determined fracture toughness of the selected composites was in accordance with the experimental data (the authors’ tests and literature data). In addition, the obtained results were compared with data captured by means of the rule of mixtures (ROM). It was found that the prediction of KICeff using the ROM was subject to a significant error. Moreover, a study of the effect of averaging the elastic–plastic parameters of the composite, on KICeff, was performed. The results showed that if the yield stress of the composite increased, a decrease in its fracture toughness was noticed, which is in line with the literature reports. Furthermore, it was noted that an increase in the Young’s modulus of the composite affected KICeff in the same way as a change in its yield stress.

Schlagwörter

Stichwörter der Autor:innen

Weibull distributioncompositeseffective fracture toughnessprobabilistic modelling

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, Bialystok University of Technology, 45C Wiejska Str., 15-351 Bialystok, Poland.
  • Department of Vehicle Type-Approval & Testing, Motor Transport Institute, 80 Jagiellonska Str., 03-301 Warsaw, Poland.

ORCID-Profile: Grzegorz Mieczkowski, Tadeusz Szymczak, Dariusz Szpica, Andrzej Borawski

Förderung

  • Ministry of Science and Higher Education of Poland with allocation to the Faculty of Mechanical Engineering Bialystok University of Technology

Zitieren

APA

Mieczkowski, G., Szymczak, T., Szpica, D., & Borawski, A. (2023). Probabilistic Modelling of Fracture Toughness of Composites with Discontinuous Reinforcement. Materials, 16(8), 2962. https://doi.org/10.3390/ma16082962

Vancouver

Mieczkowski G, Szymczak T, Szpica D, Borawski A. Probabilistic Modelling of Fracture Toughness of Composites with Discontinuous Reinforcement. Materials. 2023;16(8):2962. doi:10.3390/ma16082962

BibTeX
@article{Mieczkowski2023,
  author = {Mieczkowski, Grzegorz and Szymczak, Tadeusz and Szpica, Dariusz and Borawski, Andrzej},
  title = {Probabilistic Modelling of Fracture Toughness of Composites with Discontinuous Reinforcement},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {8},
  pages = {2962},
  doi = {10.3390/ma16082962}
}
Kostenlos starten →