EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

How Retting Could Affect the Mechanical Behavior of Flax/Epoxy Biocomposite Materials?

Mohamed Ragoubi iD, Morgan Lecoublet, Mehdi Khennache, Leonard Ionut Atanase iD, Christophe Poilane, Nathalie Leblanc iD

Materials · 06.04.2023 · 16 (7) · 2929

DOI: 10.3390/ma16072929 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.04.2023. Verfasst von Mohamed Ragoubi und 5 weiteren Autor:innen. Beteiligte Einrichtung: UniLaSalle, Unité de Recherche Transformation et Agro-Ressources, VAM2IN (ULR 7519 UniLaSalle-Université d'Artois), 76130 Mont-Saint-Aignan, France. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Normandy region and FEDER NAME OF FUNDER, Normandy region and FEDER.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on the retting effect on the mechanical properties of flax biobased materials. For the technical fiber, a direct link was established between the biochemical alteration of technical flax and their mechanical properties. In function of the retting level, technical fibers appeared smoother and more individualized; nevertheless, a decrease in the ultimate modulus and maximum stress was recorded. A biochemical alteration was observed as the retting increased (a decrease in the soluble fraction from 10.4 ± 0.2 to 4.5 ± 1.2% and an increase in the holocellulose fractions). Regarding the mechanical behavior of biocomposites manufactured by thermocompression, a non-elastic behavior was observed for the tested samples. Young moduli (E1 and E2) gradually increased with retting. The retting effect was more pronounced when a normalization was performed (according to the fiber volume and porosity). A 40% increase in elastic modulus could be observed between under-retting (−) and over-retting (+). Moreover, the porosity content (Vp) increased overall with fiber content. Setup 3, with optimized processing parameters, was the most desirable processing protocol because it allowed the highest fiber fraction (Vf) for the lowest Vp.

Schlagwörter

Stichwörter der Autor:innen

biobased compositeflax fibersflax morphologymechanical performancesretting effect

Autor:innen und Institutionen

  • UniLaSalle, Unité de Recherche Transformation et Agro-Ressources, VAM2IN (ULR 7519 UniLaSalle-Université d'Artois), 76130 Mont-Saint-Aignan, France.
  • Faculty of Medical Dentistry, Apollonia University of Iasi, 700511 Iasi, Romania.
  • Academy of Romanian Scientists, 050045 Bucharest, Romania.
  • Normandie Université, Université de Caen Normandie (UNICAEN), 14000 Caen, France.

ORCID-Profile: Mohamed Ragoubi, Leonard Ionut Atanase, Nathalie Leblanc

Förderung

  • Normandy region and FEDER NAME OF FUNDER
  • Normandy region and FEDER

Zitieren

APA

Ragoubi, M., Lecoublet, M., Khennache, M., Atanase, L. I., Poilane, C., & Leblanc, N. (2023). How Retting Could Affect the Mechanical Behavior of Flax/Epoxy Biocomposite Materials?. Materials, 16(7), 2929. https://doi.org/10.3390/ma16072929

Vancouver

Ragoubi M, Lecoublet M, Khennache M, Atanase LI, Poilane C, Leblanc N. How Retting Could Affect the Mechanical Behavior of Flax/Epoxy Biocomposite Materials?. Materials. 2023;16(7):2929. doi:10.3390/ma16072929

BibTeX
@article{Ragoubi2023,
  author = {Ragoubi, Mohamed and Lecoublet, Morgan and Khennache, Mehdi and Atanase, Leonard Ionut and Poilane, Christophe and Leblanc, Nathalie},
  title = {How Retting Could Affect the Mechanical Behavior of Flax/Epoxy Biocomposite Materials?},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {7},
  pages = {2929},
  doi = {10.3390/ma16072929}
}
Kostenlos starten →